Construction Calculators

Jump to a tool or explore below.

Free Tile Calculator

Tile Calculator

Work out how many tiles and boxes you need for a floor or wall, with grout joints, layout pattern waste, thin-set bags and grout included.

Tiles and boxes with waste
Imperial and metric sizes
Thin-set and grout

Tile, Thin-Set & Grout Calculator

Enter the area, tile size, joint width and pattern. Add the box coverage from the carton to get boxes.

Calculator inputs

1/8 in = 0.125 in (about 3 mm).

Used as the grout joint depth.

Leave blank to use the pattern default.

Printed on the carton.

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked Example

A 10 × 8 ft bathroom floor in 12 × 24 in porcelain, 3/8 in thick, with 1/8 in joints, a straight layout, 15.5 sq ft per box and a 1/4 × 3/8 in square-notch trowel.

10 × 8 ft floor, 12 × 24 in tile

Step 1: Area

Length times width.

10 × 8 = 80 sq ft

Step 2: Tile footprint

Each tile plus its joint is 12.125 × 24.125 in.

12.125 × 24.125 ÷ 144 = 2.03 sq ft per tile

Step 3: Tiles

Divide, then add 10% waste for a straight layout.

80 ÷ 2.03 = 39.4 → 40 tiles · 88 ÷ 2.03 → 44 tiles (48 in herringbone at 20%)

Step 4: Boxes

Area with waste divided by box coverage.

88 ÷ 15.5 = 5.7 → 6 boxes

Step 5: Thin-set and grout

60 sq ft per 50 lb bag with a 1/4 × 3/8 in notch; grout from joint volume.

80 ÷ 60 → 2 bags of thin-set · about 4.3 lb of grout → 1 bag

Tile Sizes and Tiles per Area

Common tile sizes with the number of tiles per 100 sq ft or per square metre, before grout joints and waste.

Tile sizeArea per tileTiles per 100 sq ftTypical use
3 × 6 in subway0.125 sq ft800Backsplashes, shower walls
4 × 4 in0.111 sq ft900Walls, shower floors
6 × 6 in0.25 sq ft400Walls, small floors
8 × 8 in0.444 sq ft225Floors
12 × 12 in1 sq ft100Floors
6 × 24 in plank1 sq ft100Floors, wood-look porcelain
12 × 24 in2 sq ft50Floors, walls
8 × 48 in plank2.67 sq ft37.5Floors
24 × 24 in4 sq ft25Large-format floors

Metric Tile Sizes

Tiles per square metre for common metric sizes, before joints and waste. Switch the calculator to metric to enter millimetres.

Tile sizeArea per tileTiles per m²
75 × 150 mm0.01125 m²88.9
100 × 100 mm0.01 m²100
150 × 150 mm0.0225 m²44.4
200 × 200 mm0.04 m²25
300 × 300 mm0.09 m²11.1
300 × 600 mm0.18 m²5.6
600 × 600 mm0.36 m²2.8
600 × 1200 mm0.72 m²1.4

Waste Factor by Layout Pattern

The calculator defaults to these waste allowances. Override them if your cut rate is different.

PatternCalculator defaultPublished guidance
Straight / grid10%At least 10% extra (MSI; Bob Vila)
Brick / offset10%10%, up to 15% for patterned layouts (MSI)
Diagonal15%15% for patterned layouts (MSI); up to 20% (Bob Vila)
Herringbone20%Up to 20% (Bob Vila)

Sources: MSI, How Much Wall Tile Do I Need; Bob Vila, How Much Tile Do I Need. Add more for rooms with many corners, for large tiles and for natural stone.

Thin-Set Coverage by Trowel Notch

Coverage per 50 lb bag of thin-set mortar published by Custom Building Products. The calculator uses the low end of each range.

Trowel notchCoverage per 50 lb bagProduct
1/4 × 1/4 in square90–100 sq ftVersaBond Flex
1/4 × 3/8 in square60–67 sq ftVersaBond
1/2 × 1/2 in square42–47 sq ftVersaBond HP (large and heavy tile)

Source: Custom Building Products product data. Coverage varies with the substrate and the tile; follow the mortar and tile maker on notch size for your tile.

Automate your tile takeoffs and quotes.

Quote more tile jobs with less time measuring floors and walls and re-entering material quantities. BuildVision extracts floor and wall areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Tile Calculator Works

The calculator divides the area you are tiling by the space one tile takes up including its grout joint, so a 12 x 24 in tile with a 1/8 in joint counts as 12.125 x 24.125 in. That is more accurate than dividing by the bare tile size, which slightly overcounts for wide joints and small tiles. It then adds a waste allowance for cuts and breakage, rounds up to whole tiles, and converts to boxes if you enter the coverage printed on the carton.

Waste depends on the layout. The calculator defaults to 10 percent for a straight grid or brick offset, 15 percent for a diagonal layout and 20 percent for herringbone, and you can override it. Those defaults sit inside the ranges published by tile retailers and home-improvement guides: MSI recommends buying at least 10 percent extra for a standard installation and 15 percent for tile with a patterned shape or layout, and Bob Vila recommends at least 10 percent and up to 20 percent for herringbone or diagonal layouts. Diagonal and herringbone produce more cut pieces at every wall, so they need more spare tile.

Setting materials come from the same area. Thin-set bags use the coverage Custom Building Products publishes for its VersaBond mortars per 50 lb bag: about 90 to 100 sq ft with a 1/4 x 1/4 in square-notch trowel and about 60 to 67 sq ft with a 1/4 x 3/8 in notch, plus about 42 to 47 sq ft with a 1/2 x 1/2 in notch for its large-and-heavy-tile mortar. The calculator uses the low end of each range. Grout is the volume of the joints (joint width x tile thickness along every joint) times a density of 112 lb per cubic foot, which reproduces the coverage chart Custom publishes for Polyblend Plus sanded grout.

Tile formulas

  • Area = length x width
  • Tile footprint = (tile length + joint) x (tile width + joint)
  • Tiles = round up(area x (1 + waste %) / tile footprint)
  • Boxes = round up(area x (1 + waste %) / coverage per box)
  • Thin-set bags = round up(area / sq ft per 50 lb bag for the trowel notch)
  • Grout (lb) = area x joint share of surface x tile thickness x 112 lb/ft³

Estimating Steps and Checks

1

Measure the area

Measure the floor or wall length and width. For an L-shaped room, split it into rectangles and add the results, or run the calculator once for each rectangle. For walls, measure the tiled height, not the full wall height.

2

Enter the tile and joint

Enter the tile size as sold (12 x 24 in, or 300 x 600 mm in metric), the grout joint you plan to use and the tile thickness. Rectified porcelain is often set with 1/16 to 1/8 in joints; handmade and rustic tile usually needs wider joints.

3

Pick the pattern

Choose straight, brick, diagonal or herringbone. The waste allowance updates to the pattern default; enter your own if you know your cut rate.

4

Add box coverage and trowel

Enter the square footage per box from the carton to get a box count, and choose the trowel notch your tile size calls for to get thin-set bags.

5

Order and keep spares

Order full boxes from the same lot or shade number, and keep a few unopened tiles after the job for repairs.

Common Checks

  • A 12 x 12 in tile with a 1/8 in joint covers 1.02 sq ft, not 1 sq ft. Small tiles with wide joints show the biggest difference.
  • Large-format tile, uneven floors and stone usually need a deeper trowel notch than the size alone suggests. Follow the mortar and tile maker's coverage requirements for the tile you are setting.
  • Waste is applied to tiles and boxes, not to thin-set or grout. Grout bags include a separate 10 percent allowance.
  • Sources: MSI wall tile buying guide (10 percent standard, 15 percent patterned); Bob Vila tile guide (at least 10 percent, up to 20 percent for herringbone or diagonal); Custom Building Products VersaBond product data for thin-set coverage; Custom Building Products Polyblend Plus TDS-360 for grout coverage.

Tile Calculator FAQs

How much tile do I need for a 10x10 room?

A 10 x 10 floor is 100 sq ft. With 12 x 12 in tile and 1/8 in joints, each tile covers about 1.02 sq ft, so the floor takes 98 tiles before waste. With 10 percent waste for a straight layout, order 108 tiles, or 110 sq ft of tile in boxes.

How much extra tile should I buy?

About 10 percent for a straight or brick layout, 15 percent for diagonal and 20 percent for herringbone are common starting points. MSI recommends at least 10 percent extra and 15 percent for patterned layouts; Bob Vila recommends up to 20 percent for herringbone or diagonal. Add more for rooms with many corners, for large tiles where each broken piece is a big share of the order, and for natural stone with color variation.

How many tiles are in a square foot?

Divide 144 by the tile area in square inches. A 12 x 12 tile is 1 per sq ft, a 6 x 6 is 4 per sq ft, a 4 x 4 is 9 per sq ft and a 3 x 6 subway tile is 8 per sq ft, before joints and waste. Grout joints reduce those counts slightly.

How do I calculate tile for a herringbone pattern?

Calculate the area the same way as any layout, then use a larger waste allowance because every row ends in an angled cut at the wall. The calculator defaults to 20 percent for herringbone. A 10 x 8 ft floor in 12 x 24 in tile with 1/8 in joints needs 40 tiles before waste and 48 with 20 percent herringbone waste.

How many boxes of tile do I need?

Divide the area including waste by the square footage printed on the box, and round up. For an 80 sq ft floor with 10 percent waste (88 sq ft) and boxes that cover 15.5 sq ft, that is 88 / 15.5 = 5.7, so 6 boxes.

How much thin-set do I need?

It depends on the trowel notch. Custom Building Products lists about 90 to 100 sq ft per 50 lb bag of VersaBond with a 1/4 x 1/4 in square notch and about 60 to 67 sq ft with a 1/4 x 3/8 in square notch. An 80 sq ft floor of 12 x 24 tile set with a 1/4 x 3/8 notch needs 2 bags.

What size tiles are available in metric?

Common metric tile sizes include 200 x 200, 300 x 300, 300 x 600, 600 x 600 and 600 x 1200 mm, plus 75 x 150 mm subway tile. Switch the calculator to metric to enter room size in metres and tile size in millimetres; it returns square metres, kilograms and the same tile counts.

How much grout do I need for tile?

Grout depends on joint width, tile thickness and tile size, because smaller tiles have more joint per square foot. For 12 x 12 x 3/8 in tile with 1/8 in joints, a 25 lb bag of sanded grout covers about 348 sq ft. Use the grout calculator for other sizes, or read the grout output here.

Try it on your own plans

Automate your tile takeoffs and quotes.

Quote more tile jobs with less time measuring floors and walls and re-entering material quantities. BuildVision extracts floor and wall areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Tile Calculator | Tiles, Boxes, Thinset & Grout