Construction Calculators
Jump to a tool or explore below.
Markup Calculator
Turn cost into a sell price, find the markup hidden in a price, or convert a target margin into the markup that hits it. Price the whole bid at once or give each line its own markup.
Whole bid: markup and margin
Solve from a markup percentage, a target profit margin, or a cost and a sell price.
Per line: a different markup on each bid line
Carry a higher markup on self-performed work and a lower one on pass-through costs, then see the blended markup and margin of the whole bid.
Bid roll-up
| Line | Sell price |
|---|---|
| Self-performed framing labor$40,000.00 + 25% | $50,000.00 |
| Lumber package$30,000.00 + 15% | $34,500.00 |
| Electrical subcontract$30,000.00 + 10% | $33,000.00 |
- Total cost
- $100,000.00
- Bid price
- $117,500.00
- Blended markup
- 17.5%
- Gross margin
- 14.89%
Markup vs Margin
Markup and margin describe the same dollars of profit against two different bases. Markup is profit as a percent of cost. Margin is profit as a percent of the sell price. Because the price is always larger than the cost, the margin is always smaller than the markup on the same job.
Sell price = cost x (1 + markup)
Markup = (price - cost) / cost
Margin = (price - cost) / price
Markup = margin / (1 - margin)
Margin = markup / (1 + markup)
Sell price = cost / (1 - margin)
Worked examples
Cost to price
$100,000 of cost with a 25% markup: $100,000 x 1.25 = $125,000. Profit is $25,000, which is a 20% margin ($25,000 / $125,000).
Price to markup
A change order costs you $8,400 and you priced it at $11,000. Profit is $2,600: a 30.95% markup ($2,600 / $8,400) and a 23.64% margin ($2,600 / $11,000).
Margin to markup
To earn a 30% margin on $50,000 of cost, the markup is 0.30 / 0.70 = 42.86%. Price: $50,000 / 0.70 = $71,428.57, profit $21,428.57.
Per-line example (the default in the per-line tool): $40,000 of self-performed labor at 25%, a $30,000 lumber package at 15%, and a $30,000 electrical subcontract at 10% price at $50,000 + $34,500 + $33,000 = $117,500. The blended markup is 17.5% on $100,000 of cost, and the margin is 14.89%.
Markup to Margin Conversion Table
Read across to convert. A markup can exceed 100% (a 100% markup doubles the cost), but a margin can never reach 100%, because that would mean the work cost nothing.
| Markup on cost | Margin on price | Price for $1,000 cost |
|---|---|---|
| 10% | 9.09% | $1,100.00 |
| 15% | 13.04% | $1,150.00 |
| 20% | 16.67% | $1,200.00 |
| 25% | 20% | $1,250.00 |
| 30% | 23.08% | $1,300.00 |
| 33.33% | 25% | $1,333.30 |
| 40% | 28.57% | $1,400.00 |
| 50% | 33.33% | $1,500.00 |
| 60% | 37.5% | $1,600.00 |
| 75% | 42.86% | $1,750.00 |
| 100% | 50% | $2,000.00 |
| Target margin | Markup needed | Price for $1,000 cost |
|---|---|---|
| 5% | 5.26% | $1,052.63 |
| 10% | 11.11% | $1,111.11 |
| 15% | 17.65% | $1,176.47 |
| 20% | 25% | $1,250.00 |
| 25% | 33.33% | $1,333.33 |
| 30% | 42.86% | $1,428.57 |
| 35% | 53.85% | $1,538.46 |
| 40% | 66.67% | $1,666.67 |
| 45% | 81.82% | $1,818.18 |
| 50% | 100% | $2,000.00 |
What Markup Do Contractors Use?
There is no single right markup. It has to recover your overhead and leave the profit you need, so the useful benchmarks are published margins, converted back to markup:
- Home builders: NAHB's Cost of Construction Survey reports average builder profit of 11.0% of the sales price in 2024 (10.1% in 2022), with overhead and general expenses at 5.7%. An 11.0% margin equals a 12.36% markup on everything else in the price.
- Remodelers: NAHB's 2026 Remodelers' Cost of Doing Business Study reports an average gross profit margin of 29.9% and an average net profit margin of 6.3% for fiscal year 2024. A 29.9% gross margin equals a markup of about 42.65% on the cost of the work; most of that gross profit goes to operating expenses before the 6.3% net is left.
These are averages across surveyed firms, not targets. Build your own number from your books: overhead as a percent of annual job cost, plus the net profit you want, then convert that target margin to markup with the table above.
Automate takeoff, pricing, and quoting.
Spend less time rebuilding price sheets and more time sending quotes. BuildVision extracts quantities from your plans and carries them through your costs and markup into a branded quote, with your team reviewing the final scope and price. Try it free on your own plans.
Other Construction Calculators
Explore our full suite of free construction calculators
How the Markup Calculator Works
Add a 20 percent markup to $100,000 of cost and the price is $120,000, but the margin on that price is 16.67 percent, not 20. A business that sets prices with markup and reads results as margin will see less profit than it expected on every job. The calculator shows both numbers side by side so the difference is visible before the bid goes out.
Use it wherever a percentage gets added to cost: base bids, change orders, material resale, subcontractor costs, and time-and-materials work. Solve from markup, from a target margin, or from a cost and a price you already quoted, and use per-line mode when different parts of the bid carry different markups.
Markup and margin formulas
- Sell price = cost x (1 + markup)
- Markup = (sell price - cost) / cost
- Margin = (sell price - cost) / sell price
- Markup needed = target margin / (1 - target margin)
- Blended markup = (total price - total cost) / total cost
Estimating Steps and Checks
Start from the full cost
Enter direct cost: materials, labor with burden, equipment, and subcontracts. If overhead is not in the cost, your markup has to recover it as well as profit.
Pick what you are solving from
Choose markup percentage when you price by adding a percent to cost, desired profit margin when your target is a share of the price, or cost and sell price to see what an existing quote earns.
Split the bid when markups differ
Use the per-line tool to put a different markup on self-performed work, materials, and subcontracts, then check the blended markup and margin of the whole bid.
Check the profit in dollars
A percentage can look healthy on a small job and still leave too few dollars to cover the risk. Compare the gross profit with what could go wrong on the job before you send the price.
Common Checks
- Quick conversions: 10% markup = 9.09% margin, 20% = 16.67%, 25% = 20%, 33.33% = 25%, 50% = 33.33%, 100% = 50%.
- Read the contract before marking up change orders or subcontract costs. Some contracts set or cap the percentage allowed for overhead and profit.
- Round bid totals up, not down. Rounding a price down cuts straight into the profit line.
- Track the margin you actually earned on closed jobs and compare it with the markup you bid.
Markup Calculator FAQs
What is the difference between markup and margin?
Markup is profit divided by cost; margin is profit divided by the sell price. $100,000 of cost sold for $125,000 is a 25 percent markup and a 20 percent margin. Same job, same $25,000 profit, two different bases.
How do I calculate markup from margin?
Divide the margin by one minus the margin. For a 25 percent margin: 0.25 / 0.75 = 0.3333, a 33.33 percent markup. On $100,000 of cost that gives a $133,333.33 price and $33,333.33 profit, which is exactly 25 percent of the price.
How do I calculate markup from a cost and a sell price?
Subtract cost from price, then divide by cost. A change order that costs $8,400 and is priced at $11,000 has $2,600 of profit: 2,600 / 8,400 = 30.95 percent markup. The margin is 2,600 / 11,000 = 23.64 percent.
What markup do contractors use?
It depends on overhead and the profit target, so start from published margins. NAHB reports average home builder profit of 11.0 percent of the sales price in 2024 (Cost of Construction Survey), which equals about a 12.36 percent markup. NAHB's 2026 Remodelers' Cost of Doing Business Study reports a 29.9 percent average gross margin and a 6.3 percent net margin for 2024; a 29.9 percent gross margin equals about a 42.65 percent markup on the cost of the work.
How do I calculate markup on a bid with different markups per line?
Price each line at cost x (1 + its markup), add the line prices, then divide total profit by total cost for the blended markup. $40,000 at 25 percent, $30,000 at 15 percent, and $30,000 at 10 percent price at $117,500: a 17.5 percent blended markup and a 14.89 percent margin.
Can markup be more than 100 percent?
Yes. A 100 percent markup doubles the cost and gives a 50 percent margin; a 150 percent markup gives a 60 percent margin. Margin can never reach 100 percent, because that would mean the work cost nothing.
Should overhead be in the cost or in the markup?
Either works if you are consistent. If overhead is excluded from cost, the markup must cover overhead and profit, so it will be higher than the markup on a cost that already carries overhead. Mixing the two methods across bids is how overhead goes unrecovered.
Estimating Software by Trade
Related Tools & Resources
Turn Calculator Work Into Bids
Estimating Software
Related Calculators
Try it on your own plans
Automate takeoff, pricing, and quoting.
Spend less time rebuilding price sheets and more time sending quotes. BuildVision extracts quantities from your plans and carries them through your costs and markup into a branded quote, with your team reviewing the final scope and price. Try it free on your own plans.
First takeoff free · No card · $299/seat/month after