Construction Calculators
Jump to a tool or explore below.
Carpet Calculator
Work out how much carpet to order by laying real roll widths across each room. Get square yards, seams, waste, pad and cost.
Carpet & Pad Calculator
Enter each room section and the roll width. Add sections for L-shaped rooms.
Worked Example
An 18 × 14 ft living room with 6 in of trim per drop, priced in 12 ft and 15 ft carpet.
18 × 14 ft room, 12 ft vs 15 ft roll
Step 1: Room area
Length times width, then divide by 9.
Step 2: 12 ft roll
The room is wider than the roll in both directions, so it takes two drops. Running across the 14 ft side is shorter.
Step 3: 15 ft roll
The 14 ft width fits in one drop.
Step 4: Compare
Waste is the ordered area over the room area.
Carpet to Order for Common Room Sizes
Single rectangular rooms, 6 in trim per drop, roll direction chosen for least carpet.
| Room | Room area | 12 ft roll | 15 ft roll |
|---|---|---|---|
| 10 × 10 ft | 11.1 sq yd | 14.0 sq yd | 17.5 sq yd |
| 12 × 12 ft | 16.0 sq yd | 16.7 sq yd | 20.8 sq yd |
| 12 × 14 ft | 18.7 sq yd | 19.3 sq yd | 20.8 sq yd |
| 14 × 16 ft | 24.9 sq yd | 38.7 sq yd (1 seam) | 27.5 sq yd |
| 15 × 20 ft | 33.3 sq yd | 41.3 sq yd (1 seam) | 34.2 sq yd |
| 18 × 14 ft | 28.0 sq yd | 38.7 sq yd (1 seam) | 30.8 sq yd |
Rooms no wider than the roll need no seam. Pattern carpet may need extra length to match across seams.
Square Feet, Square Yards and Square Metres
Carpet is usually priced by the square yard in the US and by the square metre elsewhere.
| Unit | Equals |
|---|---|
| 1 sq yd | 9 sq ft (0.836 m²) |
| 1 m² | 10.76 sq ft (1.196 sq yd) |
| 100 sq ft | 11.1 sq yd (9.29 m²) |
Automate your flooring takeoffs and quotes.
Get more flooring quotes out with less time measuring rooms and rebuilding material lists. BuildVision extracts room areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
How the Carpet Calculator Works
Carpet comes off a roll of fixed width, usually 12 ft or 15 ft for broadloom in the US, and is cut in lengths called drops. The calculator lays drops across each room section in both directions, adds a trim allowance to every drop, and picks the direction that uses the least carpet unless you choose one. The carpet to order is the roll width times the total length cut, which is why it is always more than the room area.
Carpet is priced by the square yard in the US, so results are shown in square yards (square feet divided by 9) as well as square feet; in metric they are in square metres. Pad is cut to the room, so it is calculated on room area. Enter prices per square yard for carpet, pad and installation to get a cost; installation is priced on the carpet ordered, the way most installers quote it, but check your quote.
L-shaped and irregular rooms are entered as separate rectangular sections. The calculator lays each section on its own, which is conservative: an installer may be able to use the offcut from one section to fill another, especially in closets and doorways.
Carpet formulas
- Drops = round up(room width across the roll / roll width)
- Roll length = drops x (room length along the roll + trim allowance)
- Carpet to order (sq ft) = roll length x roll width
- Square yards = square feet / 9
- Waste % = carpet ordered / room area - 1
- Seams = drops - 1 per section
Estimating Steps and Checks
Measure each room section
Measure the length and width at the widest points, into doorways and closets. Split L-shaped rooms into rectangles and enter each as a section.
Pick the roll width
Enter 12 ft or 15 ft (or 4 m or 5 m in metric) for the carpet you are pricing. A room no wider than the roll can be carpeted with no seam.
Choose the direction
Leave the direction on auto to get the least carpet, or choose one so the pile runs the same way through connected rooms and seams fall where you want them.
Set trim and pad
Keep a few inches per drop for trimming at the walls (6 in is the default) and tick the pad box if you are replacing pad.
Price the job
Enter prices per square yard for carpet, pad and installation. Add stairs, transitions and furniture moving separately if your installer charges for them.
Common Checks
- A room that is wider than the roll needs a seam. A 14 ft wide room in 12 ft carpet needs two drops and wastes a 10 ft wide strip, unless the roll runs the other way or you use 15 ft carpet.
- Pattern carpet and carpet with a directional pile may need extra length to match across seams. Ask the retailer for the pattern repeat and add it to the trim allowance.
- Ordered area is what you pay for. Comparing quotes by room area understates the cost of any layout with offcuts.
Carpet Calculator FAQs
How much carpet do I need for a 12x14 room?
The room is 168 sq ft, or 18.7 sq yd. With 12 ft carpet running along the 14 ft side and 6 in of trim, one drop 14.5 ft long covers it with no seam: 174 sq ft, or 19.3 sq yd, to order.
How do I convert square feet to square yards for carpet?
Divide square feet by 9, because one square yard is 3 ft x 3 ft. A 12 x 15 ft room is 180 sq ft, which is 20 sq yd.
Should I buy 12 ft or 15 ft wide carpet?
Choose the width that covers the room with the fewest seams and least offcut. An 18 x 14 ft room needs two drops of 12 ft carpet (348 sq ft ordered, one seam) but only one drop of 15 ft carpet (277.5 sq ft, no seam). The calculator shows both if you change the roll width.
How much extra carpet should I order?
There is no fixed percentage: the extra comes from the roll width and the trim on each drop, so it depends on the room. A 12 x 14 room in 12 ft carpet wastes under 4 percent; an 18 x 14 room in the same carpet wastes about 38 percent. That is why the calculator lays out the drops instead of adding a flat percentage.
How much carpet pad do I need?
Pad is cut to the room, so you need the room area: 18.7 sq yd for a 12 x 14 room. Pad is sold in rolls, so round up to whole rolls.
How do I calculate carpet for an L-shaped room?
Split the L into two rectangles that do not overlap and enter each as a section. The calculator lays carpet for each section and adds them. An installer may be able to fill part of one section with an offcut from the other, so treat the result as the upper end.
How do I estimate the cost of carpet?
Multiply the carpet ordered in square yards by the carpet price, add pad at its price per square yard of room area, and add installation. Enter all three prices and the calculator totals them.
Estimating Software by Trade
Related Tools & Resources
Turn Calculator Work Into Bids
Estimating Software
Related Calculators
Try it on your own plans
Automate your flooring takeoffs and quotes.
Get more flooring quotes out with less time measuring rooms and rebuilding material lists. BuildVision extracts room areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
First takeoff free · No card · $299/seat/month after