Construction Calculators

Jump to a tool or explore below.

Free Wallpaper Calculator

Wallpaper Calculator

Count the wallpaper rolls you need from the strips you will actually hang, with pattern repeat, half-drop match, door openings and paste included.

Strips and rolls
Pattern repeat and match
Paste and cost

Wallpaper Roll Calculator

Enter the wall width and height, then the roll size and pattern repeat from the label.

Calculator inputs

A 12 × 10 ft room papered on all four walls is 2 × (12 + 10) = 44 ft.

Doors, patio doors, built-ins. Windows are not deducted: strips above and below them still use a full cut.

A US double roll and a standard European roll are both about 20.5 in × 33 ft (0.53 × 10.05 m).

Printed on the label. 0 for random-match papers.

Extra length for trimming at ceiling and baseboard.

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked Example

All four walls of a 12 × 10 ft room with 8 ft walls and one 3 ft door, papered with 20.5 in × 33 ft rolls that have a 21 in straight-match repeat, with 4 in of trim per strip.

12 × 10 ft room, 21 in repeat

Step 1: Wall width

Perimeter minus the door.

2 × (12 + 10) − 3 = 41 ft (492 in)

Step 2: Strips

Divide by the roll width and round up.

492 ÷ 20.5 = 24 strips

Step 3: Cut length

Wall height plus trim, rounded up to whole repeats.

96 + 4 = 100 in → 5 × 21 = 105 in

Step 4: Strips per roll

Roll length divided by cut length, rounded down.

396 ÷ 105 = 3.8 → 3 strips

Step 5: Rolls and paste

Strips divided by strips per roll; paste at up to 330 sq ft per gallon.

24 ÷ 3 = 8 rolls · about 1.1 gal of paste for unpasted paper

Common Wallpaper Roll Sizes

Roll sizes vary by maker, so read the label. These are the common formats.

RollWidth × lengthArea
US single rollabout 20.5 in × 16.5 ftabout 28 sq ft
US double rollabout 20.5 in × 33 ftabout 56 sq ft
European roll0.53 × 10.05 m (20.5 in × 33 ft)about 5.3 m² (57 sq ft)

Many US papers are priced per single roll but sold only as double rolls. A double roll gives more full-length strips than two single rolls.

Strips per 33 ft Roll by Wall Height and Repeat

Straight match, 20.5 in × 33 ft roll, 4 in trim allowance per strip. Larger repeats can cost a whole strip per roll.

Wall heightRandom match21 in repeat27 in repeat
8 ft3 strips (100 in cuts)3 strips (105 in cuts)3 strips (108 in cuts)
9 ft3 strips (112 in cuts)3 strips (126 in cuts)2 strips (135 in cuts)
10 ft3 strips (124 in cuts)3 strips (126 in cuts)2 strips (135 in cuts)

Half-drop patterns add half a repeat to every cut in the calculator. Paste coverage: Roman PRO-880 technical data sheet, up to about 330 sq ft per gallon.

Automate your wallcovering takeoffs and quotes.

Spend less time measuring elevations and counting rolls by hand. Get the next quote moving. BuildVision extracts wall lengths and areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Wallpaper Calculator Works

Wallpaper is hung in vertical strips, so the calculator counts strips rather than dividing square footage by roll area. It divides the width of wall you are papering by the roll width to get the number of strips, works out how long each strip must be cut, and then how many of those strips one roll yields. Rolls to buy is the strips needed divided by strips per roll, rounded up. Dividing area by roll area ignores the offcut at the end of every roll and the length lost to pattern matching, and usually comes out short.

Pattern repeat is the distance before the design repeats down the roll, printed on the label. With a straight match, each strip has to start at the same point in the pattern, so the cut length is the wall height plus trim allowance rounded up to a whole number of repeats. With a half-drop match, alternate strips are offset by half a repeat; the calculator adds half a repeat to every cut as a planning allowance. Random-match papers need no extra length.

Roll sizes vary, so enter the width and length from the label. A US double roll and a standard European roll are both about 20.5 in wide and 33 ft long (0.53 x 10.05 m); many US papers are priced per single roll but sold only in double rolls. For unpasted paper, the paste output uses the coverage on the data sheet for Roman PRO-880 clear adhesive, up to about 330 sq ft per gallon. Pre-pasted papers need none.

Wallpaper formulas

  • Strips = round up((wall width - full-height openings) / roll width)
  • Cut length = wall height + trim allowance (random match)
  • Cut length = round up((wall height + trim) / repeat) x repeat (straight match)
  • Cut length = straight-match cut length + repeat / 2 (half-drop match)
  • Strips per roll = round down(roll length / cut length)
  • Rolls = round up(strips / strips per roll)

Estimating Steps and Checks

1

Measure the walls

Add up the width of every wall you will paper. For a whole room that is the perimeter: a 12 x 10 ft room is 44 ft. Measure the height from the top of the baseboard to the ceiling.

2

Deduct full-height openings only

Subtract the width of doors, patio doors and built-ins that run floor to ceiling. Leave windows in: the strips above and below a window come from full-length cuts, so a window saves little paper.

3

Read the roll label

Enter the roll width, roll length and pattern repeat, and pick the match type (random, straight or half-drop).

4

Set the trim allowance

Keep a few inches per strip for trimming at the ceiling and baseboard. Four inches (10 cm) per strip is the default.

5

Buy one batch

Order all the rolls at once from the same batch or run number, because colors can vary slightly between print runs.

Common Checks

  • Strips, not square feet, decide the order. A 105 in cut from a 33 ft (396 in) roll yields 3 strips and leaves 81 in that cannot be used for a full strip.
  • Large repeats change the count fast. On an 8 ft wall with 4 in trim, a 21 in repeat makes each cut 105 in and a 27 in repeat makes it 108 in; both yield 3 strips per 33 ft roll. On a 9 ft wall (112 in with trim), a 27 in repeat makes each cut 135 in and a roll yields only 2 strips.
  • The calculator counts each wall as a continuous run. If you paper single walls with wide gaps between them, run each wall separately; partial strips cannot be carried across a corner without losing the match.
  • Sources: Roman PRO-880 technical data sheet (up to about 330 sq ft per gallon). Roll dimensions vary by brand; use the label of the paper you buy.

Wallpaper Calculator FAQs

How much wallpaper do I need for a 12x10 room?

Papering all four walls of a 12 x 10 ft room with 8 ft walls and one 3 ft door means 41 ft of wall, or 24 strips of 20.5 in paper. With a 21 in straight-match repeat each strip is cut at 105 in, a 33 ft roll yields 3 strips, and you need 8 rolls.

How many square feet are in a roll of wallpaper?

A US double roll or a standard European roll, about 20.5 in by 33 ft, is about 56 sq ft. A US single roll is about half that, around 28 sq ft. The usable area is lower once trimming and pattern matching are taken out, which is why this calculator counts strips instead.

What is the difference between a single roll and a double roll?

In the US, wallpaper is often priced per single roll but sold in double rolls, which are one continuous roll twice as long. A double roll gives more full-length strips with less waste than two separate single rolls. Enter the actual length of the roll you are buying.

How does pattern repeat affect how much wallpaper I need?

Every strip has to be cut to a whole number of repeats so the pattern lines up, so a larger repeat wastes more paper per strip and can reduce the number of strips you get from each roll. A half-drop match adds about half a repeat per strip on top of that.

Should I subtract windows and doors when calculating wallpaper?

Subtract doors and other openings that run from floor to ceiling. Most papers hangers do not subtract windows, because the short strips above and below a window are cut from full-length drops and the rest of that drop is rarely usable.

How much wallpaper paste do I need?

For unpasted paper, divide the area of paper you will hang by the adhesive coverage. Roman lists up to about 330 sq ft per gallon for its PRO-880 clear adhesive, so 8 double rolls (about 360 sq ft of paper in the cut strips) need a little over a gallon. Pre-pasted papers are activated with water and need no paste.

How many extra rolls of wallpaper should I buy?

The strip method already includes trimming and pattern waste. Many installers still buy one extra roll from the same batch for mistakes and future repairs, since a later batch may not match exactly.

Try it on your own plans

Automate your wallcovering takeoffs and quotes.

Spend less time measuring elevations and counting rolls by hand. Get the next quote moving. BuildVision extracts wall lengths and areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Wallpaper Calculator | Rolls, Strips, Repeat & Paste