Construction Calculators
Jump to a tool or explore below.
Topsoil Calculator
Enter the lawn or bed size and depth to get cubic yards, tons and bags of topsoil, plus truckloads and cost.
Topsoil Yards, Tons & Bags
Pick a depth preset for lawns or beds. Change the bag size to match the bags you are buying.
Worked example: a 25 x 20 ft new lawn at 4 inches
Loam at the published 80 lb/ft³ (1.08 short tons per cubic yard), with a 15% allowance for settling, in 1 cu ft bags. These are the calculator defaults.
- 1Area = 25 ft x 20 ft = 500 sq ft
- 2Volume = 500 sq ft x (4 in / 12) = 166.7 cu ft
- 3Cubic yards = 166.7 / 27 = 6.17 yd³
- 4Order volume = 6.17 x 1.15 = 7.10 yd³ (191.7 cu ft)
- 5Weight = 166.7 cu ft x 80 lb = 13,333 lb = 6.67 short tons measured, 7.67 to order
- 6Bags = 191.7 / 1 cu ft = 192 bags
Topsoil weight per cubic yard
These are the densities the material picker fills in. Each comes from the published row named in the last column. Moisture, gradation and how the material was loaded change real weight, so use your supplier's weight per yard when you have it.
| Material | lb per cubic yard | Short tons per yd³ | Tonnes per m³ | Typical uses | Published row |
|---|---|---|---|---|---|
| Topsoil / loam | 2,160 | 1.08 | 1.28 | Lawns, garden beds, top dressing | Loam: 80 lb/ft³ |
| Dirt, loose and dry | 2,052 | 1.03 | 1.22 | Screened fill and dry excavated soil | Dirt, loose dry: 76 lb/ft³ |
| Dirt, loose and moist | 2,106 | 1.05 | 1.25 | Fill dirt as usually delivered | Dirt, loose moist: 78 lb/ft³ |
Source: Engineering ToolBox, Dirt and Mud - Densities. Where the source gives a range, the default is its midpoint. Short tons per cubic yard = lb/ft³ x 27 / 2,000.
How much topsoil depth do you need?
The depth presets in the calculator, and how far one cubic yard goes at each depth. Use the depth in your plan or specification when there is one.
| Depth | Common use | 1 yd³ covers | Yards per 100 sq ft |
|---|---|---|---|
| 1 in (2.5 cm) | top dressing | 324 sq ft | 0.31 yd³ |
| 2 in (5.1 cm) | overseeding | 162 sq ft | 0.62 yd³ |
| 4 in (10.2 cm) | new lawn | 81 sq ft | 1.23 yd³ |
| 6 in (15.2 cm) | new lawn, poor subsoil | 54 sq ft | 1.85 yd³ |
| 8 in (20.3 cm) | garden bed | 41 sq ft | 2.47 yd³ |
| 12 in (30.5 cm) | raised bed | 27 sq ft | 3.70 yd³ |
Automate your landscaping takeoffs and quotes.
Get more landscaping quotes out with less time measuring lawns and beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
How the Topsoil Calculator Works
Topsoil is ordered by the cubic yard in bulk or bought in bags labeled in cubic feet. To size the order, multiply the area by the depth you need and convert to yards. This calculator does that and also gives the weight, bag count and truckloads.
A new 25 x 20 ft lawn with 4 inches of topsoil needs 166.7 cubic feet, or 6.17 cubic yards. At the published density for loam (80 lb/ft³) that is about 6.7 short tons. With a 15 percent allowance for settling it is 7.10 cubic yards, or 192 bags of 1 cu ft.
Engineering ToolBox lists loam at 80 lb/ft³, loose dry dirt at 76 and loose moist dirt at 78, which is about 1.03 to 1.08 short tons per cubic yard. Wet topsoil weighs more. Use the supplier's weight per yard if you buy by the ton.
Topsoil volume and bag formulas
- Cubic feet = length (ft) x width (ft) x depth (in) / 12
- Cubic yards = cubic feet / 27
- Order cubic yards = cubic yards x (1 + allowance % / 100)
- Short tons = order cubic yards x bulk density (short tons per yd³)
- Bags = order cubic feet / bag size (cu ft), rounded up
Estimating Steps and Checks
Measure the lawn or bed
Measure length and width in feet. Split an irregular yard into rectangles and triangles and add them, or use Known area if you have the square footage.
Choose the depth
Pick a preset: 1 inch to top-dress, 2 inches when overseeding, 4 to 6 inches for a new lawn, 8 to 12 inches for garden and raised beds. Use the depth from your landscape plan or soil test advice when you have one.
Set the allowance
Loose topsoil settles after it is spread, rolled and watered. Add an allowance from your experience so the finished grade ends up where you want it.
Compare bags with bulk
Enter the bag size printed on the bag. One cubic yard is 27 bags of 1 cu ft or 36 bags of 0.75 cu ft, so most lawns are cheaper and faster with a bulk delivery.
Common Checks
- One cubic yard covers 324 sq ft at 1 inch, 162 sq ft at 2 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
- Raised beds: a 4 x 8 ft bed 12 inches deep holds 32 cubic feet, or 1.19 cubic yards.
- Weight check: at 80 lb/ft³, one cubic yard of loam is 2,160 lb. A pickup's payload may be less than one yard.
- Topsoil and fill dirt are different products. Use fill dirt to raise grade and topsoil for the top layer where plants grow.
Topsoil Calculator FAQs
How much topsoil do I need?
Multiply length x width in feet by depth in inches, divide by 12, then by 27 for cubic yards. A 25 x 20 ft lawn at 4 inches is 500 x 0.333 = 166.7 cubic feet, or 6.17 cubic yards. Add an allowance for settling.
How many bags of topsoil are in a yard?
A cubic yard is 27 cubic feet: 27 bags of 1 cu ft, 36 bags of 0.75 cu ft, or 13.5 bags of 2 cu ft.
How deep should topsoil be for a new lawn?
A common planning range for a new lawn is 4 to 6 inches of topsoil, with 1 to 2 inches for top-dressing or overseeding an existing lawn. Local soil, grass type and drainage matter, so follow your landscape plan or a soil test recommendation when you have one.
How much does a yard of topsoil weigh?
Engineering ToolBox lists loam at 80 lb/ft³, which is 2,160 lb, or 1.08 short tons, per cubic yard. Loose dry dirt is a little lighter (76 lb/ft³) and wet soil is heavier.
How many square feet does a yard of topsoil cover?
Divide 324 by the depth in inches: 324 sq ft at 1 inch, 162 sq ft at 2 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
How much soil do I need for a raised bed?
Length x width x depth. A 4 x 8 ft bed 12 inches deep needs 32 cubic feet, or 1.19 cubic yards: 32 bags of 1 cu ft or 43 bags of 0.75 cu ft.
How many tons of topsoil do I need?
Work out the cubic yards first, then multiply by the density. At 1.08 short tons per cubic yard (loam), 6.17 cubic yards is about 6.7 tons. If the soil is wet when it is weighed, the tons will be higher for the same volume.
Estimating Software by Trade
Related Tools & Resources
Turn Calculator Work Into Bids
Estimating Software
Try it on your own plans
Automate your landscaping takeoffs and quotes.
Get more landscaping quotes out with less time measuring lawns and beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
First takeoff free · No card · $299/seat/month after