Construction Calculators
Jump to a tool or explore below.
Cubic Yard Calculator
Enter length, width and depth to get cubic yards, cubic feet and cubic meters at once. Pick a material for tons, or add a price, bag size or truck size.
Cubic Yards, Cubic Feet & Cubic Meters
Choose a shape, enter the depth in inches (or cm), and optionally pick a material to see the weight.
Worked example: 10 x 10 ft at 4 inches
The calculator default: a 10 x 10 ft area, 4 inches deep, no allowance and no material, so the result is a pure volume conversion.
- 1Area = 10 ft x 10 ft = 100 sq ft
- 2Volume = 100 sq ft x (4 in / 12) = 33.3 cu ft
- 3Cubic yards = 33.3 / 27 = 1.23 yd³
- 4Shortcut: 100 sq ft x 4 in / 324 = 1.23 yd³
- 5Cubic meters = 1.23 x 0.7646 = 0.94 m³
- 6With dry gravel picked (1.42 short tons per yd³): 1.23 x 1.4175 = 1.75 short tons
Weight of a cubic yard by material
These are the densities the material picker fills in. Each comes from the published row named in the last column. Moisture, gradation and how the material was loaded change real weight, so use your supplier's weight per yard when you have it.
| Material | lb per cubic yard | Short tons per yd³ | Tonnes per m³ | Typical uses | Published row |
|---|---|---|---|---|---|
| Crushed stone #57 | 2,835 | 1.42 | 1.68 | Driveway top course, drainage stone, slab and footing base | Gravel, dry: 105 lb/ft³ |
| Crusher run / road base | 2,916 | 1.46 | 1.73 | Driveway and parking base, compacted sub-base under pavers and slabs | Sand with gravel, dry: 108 lb/ft³ |
| Sand, dry | 2,619 | 1.31 | 1.55 | Paver bedding, play sand, mortar and masonry sand bought dry | Sand, dry: 97 lb/ft³ |
| Topsoil / loam | 2,160 | 1.08 | 1.28 | Lawns, garden beds, top dressing | Loam: 80 lb/ft³ |
| Dirt, loose and moist | 2,106 | 1.05 | 1.25 | Fill dirt as usually delivered | Dirt, loose moist: 78 lb/ft³ |
| Wood chip mulch | 675 | 0.34 | 0.40 | Beds, paths, around trees | Woodchips: 20 - 30 lb/ft³ |
Source: Engineering ToolBox, Dirt and Mud - Densities; Engineering ToolBox, Densities of Common Products. Where the source gives a range, the default is its midpoint. Short tons per cubic yard = lb/ft³ x 27 / 2,000.
Cubic yard coverage by depth
The depth presets in the calculator, and how far one cubic yard goes at each depth. Use the depth in your plan or specification when there is one.
| Depth | Common use | 1 yd³ covers | Yards per 100 sq ft |
|---|---|---|---|
| 1 in (2.5 cm) | - | 324 sq ft | 0.31 yd³ |
| 2 in (5.1 cm) | - | 162 sq ft | 0.62 yd³ |
| 3 in (7.6 cm) | - | 108 sq ft | 0.93 yd³ |
| 4 in (10.2 cm) | - | 81 sq ft | 1.23 yd³ |
| 6 in (15.2 cm) | - | 54 sq ft | 1.85 yd³ |
| 12 in (30.5 cm) | - | 27 sq ft | 3.70 yd³ |
Automate your sitework takeoffs and quotes.
Get more sitework quotes out with less time measuring plans and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
How the Cubic Yard Calculator Works
A cubic yard is a cube 3 feet on each side: 3 x 3 x 3 = 27 cubic feet, or about 0.765 cubic meters. Bulk landscape and site materials such as soil, mulch, gravel, sand and concrete are priced and delivered by the cubic yard, so most orders start by converting a length, width and depth into yards.
Enter the area as a rectangle, circle, triangle or a known square footage, enter the depth in inches, and the calculator returns cubic yards, cubic feet and cubic meters at once. A 10 x 10 ft area at 4 inches deep is 33.3 cubic feet, or 1.23 cubic yards. Pick a material if you also want the weight; leave it on "None" for volume only.
The weights use published bulk densities (Engineering ToolBox), converted to short tons per cubic yard. They are planning figures: moisture and gradation change real weight, so use the supplier's weight per yard when you buy by the ton.
Cubic yard formulas
- Cubic feet = length (ft) x width (ft) x depth (in) / 12
- Cubic yards = cubic feet / 27, or length (ft) x width (ft) x depth (in) / 324
- Circle: cubic feet = 3.1416 x (diameter / 2)² x depth (in) / 12
- Triangle: cubic feet = base (ft) x height (ft) / 2 x depth (in) / 12
- Cubic meters = cubic yards x 0.7646
- Tons = cubic yards x bulk density (short tons per yd³)
Estimating Steps and Checks
Pick the shape and measure it
Measure length and width in feet for a rectangle, base and height for a triangle, or the diameter for a circle. If you already know the square footage, choose Known area and enter it directly. Split odd shapes into simple pieces and add them up.
Enter the depth in inches
Use a depth preset or type your own. The calculator converts inches to feet, so you do not need to divide by 12 yourself.
Add an allowance if you are ordering
The default allowance is 0 percent so the result is a pure conversion. When you order material, add an allowance for settling, compaction and spillage based on the material and your experience.
Optional: pick a material for weight and cost
Choose a material to fill in its bulk density and see tons, or enter the supplier's density. Enter a price per cubic yard to see the material cost, and a bag size or truck capacity to see bags and loads.
Common Checks
- 27 cubic feet make one cubic yard. Dividing cubic feet by 3 (because a yard is 3 feet) is the most common mistake and overstates yards nine times.
- Depth in inches must be divided by 12 before multiplying by square feet. The shortcut is square feet x inches / 324 = cubic yards.
- One cubic yard covers 324 sq ft at 1 inch, 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
- Metric check: 1 cubic yard = 0.7646 cubic meters, and 1 cubic meter = 1.308 cubic yards = 35.31 cubic feet.
Cubic Yard Calculator FAQs
How do I calculate cubic yards?
Multiply length by width in feet to get square feet, multiply by depth in feet (inches divided by 12) to get cubic feet, then divide by 27. For example, 10 ft x 10 ft x 4 in: 100 x 0.333 = 33.3 cubic feet, and 33.3 / 27 = 1.23 cubic yards.
How many cubic feet are in a cubic yard?
27. A cubic yard is 3 ft x 3 ft x 3 ft, and 3 x 3 x 3 = 27 cubic feet.
How do I convert square feet to cubic yards?
You need a depth. Multiply square feet by the depth in inches and divide by 324. 500 sq ft at 3 inches is 500 x 3 / 324 = 4.63 cubic yards.
How many square feet does a cubic yard cover?
Divide 324 by the depth in inches. One cubic yard covers 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
How do I calculate cubic yards for a circle?
Area = 3.1416 x radius², where the radius is half the diameter. Multiply by depth in feet and divide by 27. A 10 ft circle at 6 inches deep is 3.1416 x 25 x 0.5 = 39.3 cubic feet, or 1.45 cubic yards.
How many tons are in a cubic yard?
It depends on the material. Using published bulk densities (Engineering ToolBox) converted to short tons per cubic yard: dry gravel about 1.42, dry sand about 1.31, loam about 1.08, loose moist dirt about 1.05, and wood chips about 0.27 to 0.41. Moisture makes material heavier, so confirm with the supplier before buying by weight.
How many cubic meters are in a cubic yard?
One cubic yard is 0.7646 cubic meters, and one cubic meter is 1.308 cubic yards. Switch the calculator to metric to enter meters and centimeters directly.
How many bags make a cubic yard?
Divide 27 by the bag size in cubic feet: 54 bags of 0.5 cu ft, 36 bags of 0.75 cu ft, 27 bags of 1 cu ft, 13.5 bags of 2 cu ft, or 9 bags of 3 cu ft.
Estimating Software by Trade
Related Tools & Resources
Turn Calculator Work Into Bids
Estimating Software
Try it on your own plans
Automate your sitework takeoffs and quotes.
Get more sitework quotes out with less time measuring plans and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
First takeoff free · No card · $299/seat/month after