Construction Calculators

Jump to a tool or explore below.

Free Grout Calculator

Grout Calculator

Estimate how much grout you need from tile size, joint width and joint depth. Get grout volume, weight and bags for any floor or wall.

Any tile and joint size
Pounds or kilograms
Bags and coverage per bag

Grout Quantity Calculator

Enter the tiled area, tile size and joint size. Density and bag size default to sanded cement grout in 25 lb bags.

Calculator inputs

Usually the tile thickness.

Blank uses 112 lb/ft³ (1,800 kg/m³), which matches published sanded-grout coverage charts. Replace with your product figure if it differs.

Blank uses 25 lb (10 kg in metric).

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked Example

A 100 sq ft kitchen floor in 12 × 12 in tile, 3/8 in thick, with 1/8 in joints, 10% waste and 25 lb bags.

100 sq ft of 12 × 12 in tile

Step 1: Joint share

Each 12 × 12 tile plus its joint takes 12.125 × 12.125 in.

(12.125² − 144) ÷ 12.125² = 2.05% of the surface is joint

Step 2: Volume

Area × joint share × depth (3/8 in = 0.03125 ft).

100 × 0.0205 × 0.03125 = 0.064 cu ft

Step 3: Weight

Volume × 112 lb per cubic foot.

0.064 × 112 = 7.2 lb

Step 4: Bags

Add 10% waste and divide by the bag size.

7.9 lb ÷ 25 → 1 bag, which covers about 348 sq ft of this tile

Grout Coverage per 25 lb Bag

Square feet per 25 lb bag of sanded grout, calculated at 112 lb per cubic foot with the joint as deep as the tile.

Tile (W × L × thickness)1/16 in joint1/8 in joint3/16 in joint1/4 in joint
1 × 1 × 1/4 in mosaic94 sq ft51 sq ft37 sq ft30 sq ft
2 × 2 × 1/4 in mosaic180 sq ft94 sq ft65 sq ft51 sq ft
3 × 6 × 5/16 in subway281 sq ft144 sq ft98 sq ft75 sq ft
4-1/4 × 4-1/4 × 1/4 in372 sq ft190 sq ft130 sq ft99 sq ft
6 × 6 × 1/4 in522 sq ft265 sq ft180 sq ft137 sq ft
6 × 24 × 3/8 in plank555 sq ft280 sq ft189 sq ft143 sq ft
12 × 12 × 3/8 in691 sq ft348 sq ft234 sq ft177 sq ft
12 × 24 × 3/8 in920 sq ft463 sq ft310 sq ft234 sq ft
24 × 24 × 3/8 in1,377 sq ft691 sq ft463 sq ft348 sq ft

Check against the published chart: Custom Building Products lists 348, 234 and 177 sq ft per 25 lb bag of Polyblend Plus sanded grout for 12 × 12 × 3/8 in tile at 1/8, 3/16 and 1/4 in joints, and 192 sq ft for 4-1/4 in tile at 1/8 in (TDS-360). Unsanded, urethane and epoxy grouts differ; use the figures for your product.

Automate your tile takeoffs and quotes.

Spend less time working out setting materials and more time getting tile quotes out. BuildVision extracts floor and wall areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Grout Calculator Works

Grout fills the joints between tiles, so the amount you need is the volume of those joints: the share of the surface taken up by joints, times the tiled area, times the joint depth. Smaller tiles and wider joints mean more joint per square foot, which is why a mosaic can take many times as much grout as a large-format floor of the same size. The calculator converts that volume to weight with a grout density and divides by your bag size.

The default density is 112 lb per cubic foot (about 1,800 kg per cubic metre). With that density the calculator reproduces the coverage chart Custom Building Products publishes for Polyblend Plus sanded grout (TDS-360): about 348 sq ft per 25 lb bag for 12 x 12 x 3/8 in tile with 1/8 in joints, and about 192 sq ft for 4-1/4 x 4-1/4 x 1/4 in tile with 1/8 in joints. Other grouts, especially unsanded, urethane and epoxy products, have different densities and come in different package sizes, so enter the figures from your product's data sheet when you have them.

Joint depth is normally the tile thickness, because the joint is filled to the surface. If the thin-set has squeezed up into the joints, or you are regrouting and only raking out part of the joint, use the depth you will actually fill.

Grout formulas

  • Joint share = ((L + J) x (W + J) - L x W) / ((L + J) x (W + J))
  • Grout volume = area x joint share x joint depth
  • Grout weight = volume x density (112 lb/ft³ or 1,800 kg/m³ by default)
  • Grout to order = weight x (1 + waste %)
  • Bags = round up(grout to order / bag size)

Estimating Steps and Checks

1

Enter the tiled area

Use the square footage of the floor or wall you are grouting, without the tile waste allowance.

2

Enter tile length and width

Use the actual tile size. For mosaic sheets, enter the size of the individual pieces, not the sheet.

3

Enter joint width and depth

Joint width is the spacer size. Depth is usually the tile thickness; a 3/8 in tile has a 3/8 in deep joint.

4

Check density and bag size

Keep the defaults for cement-based sanded grout in 25 lb bags, or enter the density and package size from your product.

5

Order with a margin

Keep a waste allowance for mixing losses and grout left in the bucket. Buy all bags from the same lot for a consistent color.

Common Checks

  • For 12 x 12 in tile with a 1/8 in joint, joints take about 2 percent of the surface. For 4 x 4 in tile with a 3/16 in joint, they take almost 9 percent.
  • Doubling the joint depth doubles the grout. Doubling the joint width a little more than doubles it.
  • Grout bag coverage on the chart is for estimating; Custom notes that coverage varies with installation practices and jobsite conditions.
  • Source: Custom Building Products Polyblend Plus Sanded Grout TDS-360, coverage chart for a 25 lb bag.

Grout Calculator FAQs

How much grout do I need for 100 square feet?

It depends on the tile and joint. For 12 x 12 x 3/8 in tile with 1/8 in joints, 100 sq ft needs about 7.2 lb of sanded grout, so one 25 lb bag. For 4 x 4 x 1/4 in tile with 3/16 in joints, 100 sq ft needs about 20 lb.

How many square feet does a 25 lb bag of grout cover?

Custom Building Products lists about 348 sq ft per 25 lb bag of Polyblend Plus sanded grout for 12 x 12 x 3/8 in tile with 1/8 in joints, 177 sq ft with 1/4 in joints, and 192 sq ft for 4-1/4 in wall tile with 1/8 in joints. Smaller tiles and wider joints cover less.

How do I calculate grout for tile?

Work out the share of the surface taken by joints from the tile size and joint width, multiply by the area and the joint depth to get volume, then multiply by the grout density to get weight. The calculator does each step and shows the joint share, volume and weight.

Should I use sanded or unsanded grout?

Follow the grout and tile maker's guidance. Sanded grout is generally used for wider joints, and unsanded grout for narrow joints and for surfaces that sand could scratch, such as some polished stone and glass tile.

How deep should a grout joint be?

Grout is normally filled to the full depth of the joint, which is the tile thickness above the mortar bed. When regrouting, rake out the old grout evenly and use the depth you raked as the joint depth.

How much grout do I need for a backsplash?

A 30 sq ft backsplash of 3 x 6 in subway tile with 1/16 in joints and 5/16 in depth needs about 2.7 lb of grout before waste, so a small bag is enough. Wider joints or smaller tiles increase that quickly.

Can I use this for kilograms and metric tiles?

Yes. Switch to metric, enter the area in square metres, tile and joint sizes in millimetres, and the calculator returns grout in kilograms, litres and bags, using 1,800 kg per cubic metre unless you enter another density.

Try it on your own plans

Automate your tile takeoffs and quotes.

Spend less time working out setting materials and more time getting tile quotes out. BuildVision extracts floor and wall areas from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Grout Calculator | Pounds, Kilograms & Bags of Grout