Construction Calculators

Jump to a tool or explore below.

Free Topsoil Calculator

Topsoil Calculator

Enter the lawn or bed size and depth to get cubic yards, tons and bags of topsoil, plus truckloads and cost.

Topsoil Yards, Tons & Bags

Pick a depth preset for lawns or beds. Change the bag size to match the bags you are buying.

Calculator inputs

Rectangle length, or triangle base.

Rectangle width, or triangle height.

Picking a material fills this in. Replace it with the supplier's figure when you have one.

Extra for settling, compaction, uneven ground and spillage. Set from job history.

Volume printed on the bag.

Ask the hauler. Heavy material can hit the weight limit before the box is full.

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked example: a 25 x 20 ft new lawn at 4 inches

Loam at the published 80 lb/ft³ (1.08 short tons per cubic yard), with a 15% allowance for settling, in 1 cu ft bags. These are the calculator defaults.

  1. 1Area = 25 ft x 20 ft = 500 sq ft
  2. 2Volume = 500 sq ft x (4 in / 12) = 166.7 cu ft
  3. 3Cubic yards = 166.7 / 27 = 6.17 yd³
  4. 4Order volume = 6.17 x 1.15 = 7.10 yd³ (191.7 cu ft)
  5. 5Weight = 166.7 cu ft x 80 lb = 13,333 lb = 6.67 short tons measured, 7.67 to order
  6. 6Bags = 191.7 / 1 cu ft = 192 bags

Topsoil weight per cubic yard

These are the densities the material picker fills in. Each comes from the published row named in the last column. Moisture, gradation and how the material was loaded change real weight, so use your supplier's weight per yard when you have it.

Materiallb per cubic yardShort tons per yd³Tonnes per m³Typical usesPublished row
Topsoil / loam2,1601.081.28Lawns, garden beds, top dressingLoam: 80 lb/ft³
Dirt, loose and dry2,0521.031.22Screened fill and dry excavated soilDirt, loose dry: 76 lb/ft³
Dirt, loose and moist2,1061.051.25Fill dirt as usually deliveredDirt, loose moist: 78 lb/ft³

Source: Engineering ToolBox, Dirt and Mud - Densities. Where the source gives a range, the default is its midpoint. Short tons per cubic yard = lb/ft³ x 27 / 2,000.

How much topsoil depth do you need?

The depth presets in the calculator, and how far one cubic yard goes at each depth. Use the depth in your plan or specification when there is one.

DepthCommon use1 yd³ coversYards per 100 sq ft
1 in (2.5 cm)top dressing324 sq ft0.31 yd³
2 in (5.1 cm)overseeding162 sq ft0.62 yd³
4 in (10.2 cm)new lawn81 sq ft1.23 yd³
6 in (15.2 cm)new lawn, poor subsoil54 sq ft1.85 yd³
8 in (20.3 cm)garden bed41 sq ft2.47 yd³
12 in (30.5 cm)raised bed27 sq ft3.70 yd³

Automate your landscaping takeoffs and quotes.

Get more landscaping quotes out with less time measuring lawns and beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Topsoil Calculator Works

Topsoil is ordered by the cubic yard in bulk or bought in bags labeled in cubic feet. To size the order, multiply the area by the depth you need and convert to yards. This calculator does that and also gives the weight, bag count and truckloads.

A new 25 x 20 ft lawn with 4 inches of topsoil needs 166.7 cubic feet, or 6.17 cubic yards. At the published density for loam (80 lb/ft³) that is about 6.7 short tons. With a 15 percent allowance for settling it is 7.10 cubic yards, or 192 bags of 1 cu ft.

Engineering ToolBox lists loam at 80 lb/ft³, loose dry dirt at 76 and loose moist dirt at 78, which is about 1.03 to 1.08 short tons per cubic yard. Wet topsoil weighs more. Use the supplier's weight per yard if you buy by the ton.

Topsoil volume and bag formulas

  • Cubic feet = length (ft) x width (ft) x depth (in) / 12
  • Cubic yards = cubic feet / 27
  • Order cubic yards = cubic yards x (1 + allowance % / 100)
  • Short tons = order cubic yards x bulk density (short tons per yd³)
  • Bags = order cubic feet / bag size (cu ft), rounded up

Estimating Steps and Checks

1

Measure the lawn or bed

Measure length and width in feet. Split an irregular yard into rectangles and triangles and add them, or use Known area if you have the square footage.

2

Choose the depth

Pick a preset: 1 inch to top-dress, 2 inches when overseeding, 4 to 6 inches for a new lawn, 8 to 12 inches for garden and raised beds. Use the depth from your landscape plan or soil test advice when you have one.

3

Set the allowance

Loose topsoil settles after it is spread, rolled and watered. Add an allowance from your experience so the finished grade ends up where you want it.

4

Compare bags with bulk

Enter the bag size printed on the bag. One cubic yard is 27 bags of 1 cu ft or 36 bags of 0.75 cu ft, so most lawns are cheaper and faster with a bulk delivery.

Common Checks

  • One cubic yard covers 324 sq ft at 1 inch, 162 sq ft at 2 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
  • Raised beds: a 4 x 8 ft bed 12 inches deep holds 32 cubic feet, or 1.19 cubic yards.
  • Weight check: at 80 lb/ft³, one cubic yard of loam is 2,160 lb. A pickup's payload may be less than one yard.
  • Topsoil and fill dirt are different products. Use fill dirt to raise grade and topsoil for the top layer where plants grow.

Topsoil Calculator FAQs

How much topsoil do I need?

Multiply length x width in feet by depth in inches, divide by 12, then by 27 for cubic yards. A 25 x 20 ft lawn at 4 inches is 500 x 0.333 = 166.7 cubic feet, or 6.17 cubic yards. Add an allowance for settling.

How many bags of topsoil are in a yard?

A cubic yard is 27 cubic feet: 27 bags of 1 cu ft, 36 bags of 0.75 cu ft, or 13.5 bags of 2 cu ft.

How deep should topsoil be for a new lawn?

A common planning range for a new lawn is 4 to 6 inches of topsoil, with 1 to 2 inches for top-dressing or overseeding an existing lawn. Local soil, grass type and drainage matter, so follow your landscape plan or a soil test recommendation when you have one.

How much does a yard of topsoil weigh?

Engineering ToolBox lists loam at 80 lb/ft³, which is 2,160 lb, or 1.08 short tons, per cubic yard. Loose dry dirt is a little lighter (76 lb/ft³) and wet soil is heavier.

How many square feet does a yard of topsoil cover?

Divide 324 by the depth in inches: 324 sq ft at 1 inch, 162 sq ft at 2 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.

How much soil do I need for a raised bed?

Length x width x depth. A 4 x 8 ft bed 12 inches deep needs 32 cubic feet, or 1.19 cubic yards: 32 bags of 1 cu ft or 43 bags of 0.75 cu ft.

How many tons of topsoil do I need?

Work out the cubic yards first, then multiply by the density. At 1.08 short tons per cubic yard (loam), 6.17 cubic yards is about 6.7 tons. If the soil is wet when it is weighed, the tons will be higher for the same volume.

Related Tools & Resources

Turn Calculator Work Into Bids

Estimating Software

Related Calculators

Try it on your own plans

Automate your landscaping takeoffs and quotes.

Get more landscaping quotes out with less time measuring lawns and beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Topsoil Calculator | Cubic Yards, Tons & Bags