Construction Calculators

Jump to a tool or explore below.

Free Sand Calculator

Sand Calculator

Enter the area and depth to get cubic yards, tons and 0.5 cu ft bags of sand, for dry, damp or wet sand.

Sand Volume, Tons & Bags

Choose the sand condition to fill in its density. Moisture changes the weight, not the volume.

Calculator inputs

Rectangle length, or triangle base.

Rectangle width, or triangle height.

Picking a material fills this in. Replace it with the supplier's figure when you have one.

Extra for settling, compaction, uneven ground and spillage. Set from job history.

Volume printed on the bag.

Ask the hauler. Heavy material can hit the weight limit before the box is full.

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked example: 1 inch of bedding sand under a 12 x 12 ft patio

Damp sand at the published 100 lb/ft³ (1.35 short tons per cubic yard), with a 10% allowance. These are the calculator defaults.

  1. 1Area = 12 ft x 12 ft = 144 sq ft
  2. 2Volume = 144 sq ft x (1 in / 12) = 12 cu ft
  3. 3Cubic yards = 12 / 27 = 0.44 yd³
  4. 4Order volume = 12 x 1.10 = 13.2 cu ft = 0.49 yd³
  5. 5Weight = 13.2 cu ft x 100 lb = 1,320 lb = 0.66 short tons
  6. 6Bags = 13.2 / 0.5 cu ft = 26.4, so 27 bags

Sand weight per cubic yard

These are the densities the material picker fills in. Each comes from the published row named in the last column. Moisture, gradation and how the material was loaded change real weight, so use your supplier's weight per yard when you have it.

Materiallb per cubic yardShort tons per yd³Tonnes per m³Typical usesPublished row
Sand, dry2,6191.311.55Paver bedding, play sand, mortar and masonry sand bought drySand, dry: 97 lb/ft³
Sand, damp2,7001.351.60Typical stockpiled sand with some moistureSand, damp: 100 lb/ft³
Sand, wet3,2131.611.91Fill and bedding sand delivered wetSand, wet: 119 lb/ft³
Sand, wet and packed3,5101.762.08In-place compacted wet sand (not a loose delivery figure)Sand, wet, packed: 130 lb/ft³

Source: Engineering ToolBox, Dirt and Mud - Densities; Engineering ToolBox, Densities of Common Products. Where the source gives a range, the default is its midpoint. Short tons per cubic yard = lb/ft³ x 27 / 2,000.

Sand depth by use

The depth presets in the calculator, and how far one cubic yard goes at each depth. Use the depth in your plan or specification when there is one.

DepthCommon use1 yd³ coversYards per 100 sq ft
1 in (2.5 cm)paver bedding324 sq ft0.31 yd³
2 in (5.1 cm)leveling layer162 sq ft0.62 yd³
4 in (10.2 cm)under slab or pool81 sq ft1.23 yd³
6 in (15.2 cm)fill54 sq ft1.85 yd³
12 in (30.5 cm)sandbox, deep fill27 sq ft3.70 yd³

Automate your sitework takeoffs and quotes.

Get more sitework quotes out with less time measuring plans and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Sand Calculator Works

Sand is measured by volume and usually sold by the ton, and its weight changes a lot with moisture. This calculator turns area and depth into cubic yards, then into tons using the moisture condition you choose, and also gives the count of 0.5 cu ft bags.

A 12 x 12 ft paver patio with a 1 inch bedding layer needs 12 cubic feet of sand, or 0.44 cubic yards. At the density for damp sand (100 lb/ft³) that is 1,200 lb, or 0.6 short tons. With a 10 percent allowance it is 0.66 tons or 27 bags of 0.5 cu ft.

Densities come from Engineering ToolBox: dry sand 97 lb/ft³, damp sand 100, wet sand 119, and wet packed sand 130. That is 1.31 to 1.76 short tons per cubic yard. Use the supplier's weight per yard when you have it.

Sand volume and weight formulas

  • Cubic feet = length (ft) x width (ft) x depth (in) / 12
  • Cubic yards = cubic feet / 27
  • Order cubic yards = cubic yards x (1 + allowance % / 100)
  • Short tons = order cubic yards x bulk density (short tons per yd³)
  • Bags = order cubic feet / bag size (cu ft), rounded up

Estimating Steps and Checks

1

Measure the area

Measure length and width in feet. Use Circle for round sandboxes or pool bases, and Known area if you already have the square footage from a plan.

2

Choose the depth

Use the depth from the paver, slab or pool installer's instructions. The presets cover common cases: 1 inch for paver bedding, 2 inches for a leveling layer, 4 to 6 inches for a base or fill, 12 inches for a sandbox.

3

Choose dry, damp or wet sand

Stockpiled sand is usually damp. Pick the condition that matches what will be delivered, or type the supplier's density. This only changes the weight; the volume stays the same.

4

Read the order and round up

Read cubic yards, tons and bags, then round up to the supplier's minimum or to whole bags. Enter a price per ton to see the cost.

Common Checks

  • Moisture adds weight, not volume. The same cubic yard of sand is about 2,619 lb dry and 3,213 lb wet at the published densities.
  • One cubic yard covers 324 sq ft at 1 inch and 162 sq ft at 2 inches.
  • For pavers, bedding sand is screeded to an even layer over a compacted base. The base is gravel, not sand; size it with the gravel calculator.
  • Packed sand (130 lb/ft³) describes sand compacted in place, not a loose delivery. Use it only to estimate the weight of sand already in place.

Sand Calculator FAQs

How much sand do I need?

Multiply length x width in feet by depth in inches, divide by 12 for cubic feet and by 27 for cubic yards. A 12 x 12 ft patio at 1 inch needs 144 / 12 = 12 cubic feet, or 0.44 cubic yards.

How many tons of sand are in a cubic yard?

About 1.3 to 1.6 short tons for loose sand. Engineering ToolBox lists dry sand at 97 lb/ft³ (2,619 lb per cubic yard, 1.31 tons), damp sand at 100 lb/ft³ (2,700 lb, 1.35 tons) and wet sand at 119 lb/ft³ (3,213 lb, 1.61 tons).

How many bags of sand are in a cubic yard?

54 bags of 0.5 cu ft, since a cubic yard is 27 cubic feet. If your bags are labeled by weight, a 50 lb bag of dry sand at 97 lb/ft³ is about 0.52 cubic feet, so a cubic yard is about 52 of those bags.

How much sand do I need for pavers?

Pavers usually sit on a thin bedding layer, often about 1 inch, over a compacted gravel base; follow the paver manufacturer's instructions. At 1 inch, each 100 sq ft needs 8.3 cubic feet of sand. Joint sand swept between pavers is a separate, smaller quantity.

How much area does a ton of sand cover?

At 100 lb/ft³ (damp sand), one short ton is 20 cubic feet. That covers 240 sq ft at 1 inch, 120 sq ft at 2 inches or 60 sq ft at 4 inches.

How much sand for a sandbox?

A 6 x 6 ft sandbox filled 12 inches deep needs 36 cubic feet, or 1.33 cubic yards. At 97 lb/ft³ dry, that is about 3,500 lb, or 72 bags of 0.5 cu ft.

Should I buy sand by the ton or by the yard?

Use whichever the supplier prices by, but calculate in both. If they sell by the ton, ask whether the sand is dry or wet, because wet sand weighs more for the same volume and you get less volume per ton.

Try it on your own plans

Automate your sitework takeoffs and quotes.

Get more sitework quotes out with less time measuring plans and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Sand Calculator | Cubic Yards, Tons & Bags