Construction Calculators

Jump to a tool or explore below.

Free Mulch Calculator

Mulch Calculator

Enter the bed size and depth to get cubic yards of mulch, the number of 2 cu ft bags, coverage and cost.

Mulch Yards, Bags & Coverage

Use Circle for tree rings. Change the bag size to match the bags you are buying.

Calculator inputs

Rectangle length, or triangle base.

Rectangle width, or triangle height.

Picking a material fills this in. Replace it with the supplier's figure when you have one.

Extra for settling, compaction, uneven ground and spillage. Set from job history.

Volume printed on the bag.

Ask the hauler. Heavy material can hit the weight limit before the box is full.

Planning estimate only. Confirm field measurements, product coverage, local requirements, waste, pricing, and supplier quantities before ordering or bidding.

Worked example: a 20 x 5 ft bed at 3 inches

Wood chip mulch, a 10% allowance for settling, bought in 2 cu ft bags. These are the calculator defaults.

  1. 1Area = 20 ft x 5 ft = 100 sq ft
  2. 2Volume = 100 sq ft x (3 in / 12) = 25 cu ft
  3. 3Cubic yards = 25 / 27 = 0.93 yd³
  4. 4Order volume = 25 x 1.10 = 27.5 cu ft = 1.02 yd³
  5. 5Bags = 27.5 / 2 cu ft = 13.75, so 14 bags
  6. 6Weight at 25 lb/ft³ (wood chips) = 27.5 x 25 = 688 lb

How much does a yard of mulch weigh?

These are the densities the material picker fills in. Each comes from the published row named in the last column. Moisture, gradation and how the material was loaded change real weight, so use your supplier's weight per yard when you have it.

Materiallb per cubic yardShort tons per yd³Tonnes per m³Typical usesPublished row
Wood chip mulch6750.340.40Beds, paths, around treesWoodchips: 20 - 30 lb/ft³
Bark mulch4050.200.24Shredded or nugget bark in bedsBark, wood refuse: 10 - 20 lb/ft³

Source: Engineering ToolBox, Densities of Common Products. Where the source gives a range, the default is its midpoint. Short tons per cubic yard = lb/ft³ x 27 / 2,000.

How deep should mulch be?

The depth presets in the calculator, and how far one cubic yard goes at each depth. Use the depth in your plan or specification when there is one.

DepthCommon use1 yd³ coversYards per 100 sq ft
2 in (5.1 cm)top-up over old mulch162 sq ft0.62 yd³
3 in (7.6 cm)new beds108 sq ft0.93 yd³
4 in (10.2 cm)paths, weed-prone areas81 sq ft1.23 yd³

Automate your landscaping takeoffs and quotes.

Get more landscaping quotes out with less time measuring beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

How the Mulch Calculator Works

Mulch is sold by volume: by the cubic yard in bulk, or in bags labeled in cubic feet (2 cu ft is a common size). To know how much to buy you need the bed area and the depth you want. Multiply them, convert to cubic yards, then divide by the bag size if you are buying bags.

A 20 x 5 ft bed at 3 inches deep is 25 cubic feet, or 0.93 cubic yards. With a 10 percent allowance that is 1.02 cubic yards, or 14 bags of 2 cu ft. A 6 ft tree ring at 3 inches is 7.1 cubic feet, or 4 bags.

Weight is optional for mulch, but it helps when you haul it yourself. Engineering ToolBox lists woodchips at 20 to 30 lb/ft³ and bark at 10 to 20 lb/ft³, which is 540 to 810 lb and 270 to 540 lb per cubic yard. Wet mulch weighs more.

Mulch volume and bag formulas

  • Cubic feet = bed length (ft) x bed width (ft) x depth (in) / 12
  • Cubic yards = cubic feet / 27
  • Order cubic yards = cubic yards x (1 + allowance % / 100)
  • Bags = order cubic feet / bag size (cu ft), rounded up
  • Coverage per cubic yard (sq ft) = 324 / depth (in)

Estimating Steps and Checks

1

Measure each bed

Measure length and width in feet. Use Circle for tree rings (measure the diameter) and Triangle for corner beds. For curved beds, a rough rectangle that covers the bed and a small allowance is usually close enough; for large jobs, split the bed into pieces.

2

Choose the depth

Pick a depth preset: 2 inches to top up existing mulch, 3 inches for new beds, 4 inches for paths. Subtract the old mulch that is still in good shape if you are only refreshing.

3

Set the bag size

Enter the volume printed on the bag. 2 cu ft is the default; change it to 3 cu ft or 1.5 cu ft to match what the store sells.

4

Compare bags with bulk

Read the cubic yards and the bag count. One cubic yard equals 13.5 bags of 2 cu ft, so larger jobs are often easier as a bulk delivery. Enter a price per cubic yard to see the material cost.

Common Checks

  • A cubic yard of mulch covers 162 sq ft at 2 inches, 108 sq ft at 3 inches and 81 sq ft at 4 inches.
  • Bag count is based on the volume printed on the bag. Bags are often compressed or settle, so open bags can look smaller than the label.
  • Keep mulch pulled back from tree trunks and plant stems rather than piling it against them.
  • Measure depth after raking out, not in the wheelbarrow. Fresh mulch settles over the first weeks, which is what the allowance is for.

Mulch Calculator FAQs

How much mulch do I need?

Multiply bed length x width in feet by depth in inches, divide by 12 for cubic feet, then by 27 for cubic yards. A 20 x 5 ft bed at 3 inches is 100 x 0.25 = 25 cubic feet, or 0.93 cubic yards. Add an allowance if you want extra for settling.

How many bags of mulch are in a yard?

A cubic yard is 27 cubic feet, so it equals 13.5 bags of 2 cu ft, 9 bags of 3 cu ft, or 18 bags of 1.5 cu ft.

How many square feet does a yard of mulch cover?

Divide 324 by the depth in inches: 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches.

How much area does a 2 cubic foot bag of mulch cover?

A 2 cu ft bag covers 12 sq ft at 2 inches, 8 sq ft at 3 inches, or 6 sq ft at 4 inches. Divide 24 by the depth in inches.

How deep should mulch be?

A common range is 2 to 4 inches: about 2 inches to refresh an existing layer, 3 inches for a new bed, and up to 4 inches on paths. Keep it thinner right around trunks and stems.

How much does a yard of mulch weigh?

Engineering ToolBox lists woodchips at 20 to 30 lb/ft³ and bark (wood refuse) at 10 to 20 lb/ft³. Multiplied by 27, a cubic yard weighs about 540 to 810 lb for wood chips and 270 to 540 lb for bark, more if it is wet. Pick a mulch type in the calculator to see the weight.

How much mulch for a tree ring?

Use the Circle shape and measure the diameter. A 6 ft ring at 3 inches is 3.1416 x 3² x 0.25 = 7.1 cubic feet, or 4 bags of 2 cu ft.

Try it on your own plans

Automate your landscaping takeoffs and quotes.

Get more landscaping quotes out with less time measuring beds and moving quantities into a price sheet. BuildVision extracts site areas and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.

First takeoff free · No card · $299/seat/month after

Mulch Calculator | Cubic Yards, Bags & Coverage