Construction Calculators
Jump to a tool or explore below.
Lumber Calculator
Build a bill of lumber by size, length, and count. Get board feet, linear feet, pieces to order with waste, and cost per piece, linear foot, board foot, or MBF.
Bill of Lumber Calculator
One line per nominal size and length. Enter prices in the basis your supplier quotes.
Worked Example: a Small Framing Order
The default lines in the calculator: 40 studs of 2x4 x 8 ft and 12 plates of 2x6 x 16 ft, with a 10% waste allowance. Prices of $4.00 per 2x4 and $20.00 per 2x6 are illustrative only.
| Line | BF per piece | Board feet | Linear feet | Pieces to order | Cost |
|---|---|---|---|---|---|
| 2x4 x 8 ft, 40 pcs | 2 x 4 x 8 / 12 = 5.33 | 213.33 | 320 | 44 | $176.00 |
| 2x6 x 16 ft, 12 pcs | 2 x 6 x 16 / 12 = 16 | 192.00 | 192 | 14 | $280.00 |
| Total | 405.33 | 512 | 58 | $456.00 |
The 58 pieces to order contain 458.67 board feet, so the order averages about $0.99 per board foot.
Board Feet per Linear Foot and Actual Sizes
Board feet use nominal sizes. Actual dry dressed sizes are from the American Softwood Lumber Standard (PS 20). Multiply board feet per linear foot by the length to get board feet per piece.
| Nominal | Actual | BF per linear foot | Linear feet per BF |
|---|---|---|---|
| 1x4 | 3/4 x 3-1/2 | 0.333 | 3.000 |
| 1x6 | 3/4 x 5-1/2 | 0.500 | 2.000 |
| 1x8 | 3/4 x 7-1/4 | 0.667 | 1.500 |
| 1x10 | 3/4 x 9-1/4 | 0.833 | 1.200 |
| 1x12 | 3/4 x 11-1/4 | 1.000 | 1.000 |
| 2x4 | 1-1/2 x 3-1/2 | 0.667 | 1.500 |
| 2x6 | 1-1/2 x 5-1/2 | 1.000 | 1.000 |
| 2x8 | 1-1/2 x 7-1/4 | 1.333 | 0.750 |
| 2x10 | 1-1/2 x 9-1/4 | 1.667 | 0.600 |
| 2x12 | 1-1/2 x 11-1/4 | 2.000 | 0.500 |
| 4x4 | 3-1/2 x 3-1/2 | 1.333 | 0.750 |
| 4x6 | 3-1/2 x 5-1/2 | 2.000 | 0.500 |
| 6x6 | 5-1/2 x 5-1/2 | 3.000 | 0.333 |
Converting Between Price Bases
Per piece to per board foot
Divide the piece price by the board feet in the piece. A 2x4 x 8 ft at $4.00 is $4.00 / 5.33 = $0.75 per BF.
Per linear foot to per board foot
Divide the LF price by thickness x width / 12. A 2x12 at $2.40 per LF is $2.40 / 2 = $1.20 per BF.
Per MBF to per board foot
Divide by 1,000. A quote of $800 per MBF is $0.80 per board foot.
Counting the takeoff
Use the framing calculator for studs and plates, the rafter length calculator for roof framing, and enter the results here as lines.
Automate your lumber takeoffs and quotes.
Spend less time counting lumber and copying quantities into your price sheet. Put that time into your next quote. BuildVision extracts counts and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
How the Lumber Calculator Works
A lumber list is a set of lines: so many pieces of one nominal size at one length. Each line converts three ways. Pieces are what the yard pulls, linear feet are length times count, and board feet are nominal thickness times nominal width times length in feet, divided by 12. Suppliers quote in all three, plus per thousand board feet (MBF) on wholesale and mill orders, so the same list has to be priced in whatever unit the quote uses.
Enter each line of your bill of lumber with its price in the basis your supplier uses. The calculator totals pieces, linear feet, and board feet, rounds each line up to whole pieces after the waste allowance, prices the order, and reports the average cost per board foot so you can compare quotes on one number.
Lumber formulas
- Board feet per piece = nominal thickness (in) x nominal width (in) x length (ft) / 12
- Linear feet per line = length (ft) x pieces
- Pieces to order = round up (pieces x (1 + waste %)) per line
- Cost = pieces to order x price per piece, or x length x price per LF, or x BF x price per BF, or x BF x price per MBF / 1,000
- Average cost per BF = total cost / board feet ordered
Estimating Steps and Checks
Group the takeoff by size and length
Make one line per nominal size and stock length: all the 2x4 x 8 ft studs together, all the 2x6 x 16 ft plates together. Keep different species, grades, and treated lumber on separate lines because they are priced separately.
Enter the supplier price basis
Pick per piece, per linear foot, per board foot, or per MBF to match the quote, and enter each line's price. Leave a price blank to total volume only.
Set a waste allowance
Add waste for crooked or split pieces and cut-offs. Each line is rounded up to whole pieces after the allowance, because you cannot buy part of a board.
Compare quotes on cost per board foot
Use the average cost per board foot to compare a per-piece quote from one yard with a per-MBF quote from another on the same order.
Common Checks
- Worked example: 40 pieces of 2x4 x 8 ft and 12 pieces of 2x6 x 16 ft. That is 40 x 5.33 + 12 x 16 = 405.33 BF and 40 x 8 + 12 x 16 = 512 linear ft. With 10% waste, order 44 and 14 pieces, 458.67 BF.
- Priced at $4.00 per 2x4 and $20.00 per 2x6, the order is 44 x $4 + 14 x $20 = $456, or about $0.99 per board foot. The prices in this example are illustrative; use your supplier's current quote.
- Board feet use nominal sizes. A 2x4 counts as 2 in x 4 in even though it measures 1-1/2 in x 3-1/2 in, so a takeoff on actual sizes will not match the invoice.
- An MBF price converts to a board-foot price by dividing by 1,000: $800 per MBF is $0.80 per BF.
Lumber Calculator FAQs
How do I calculate how much lumber I need?
List every member by nominal size and length and count the pieces, then group identical pieces into lines. For each line, board feet = thickness x width x length in feet / 12 x pieces, and linear feet = length x pieces. Add a waste allowance and round each line up to whole pieces.
How do I calculate lumber cost?
Multiply each line by the price in the supplier's unit: pieces x price per piece, linear feet x price per LF, board feet x price per BF, or board feet x price per MBF / 1,000. Add the lines for the order total, and include waste in the quantity you price.
What is the difference between board feet and linear feet?
Linear feet measure length only. Board feet measure volume: one board foot is 144 cubic inches, a 1 x 12 in board one foot long. A 2x6 has exactly 1 board foot per linear foot; a 2x4 has 0.67 and a 2x12 has 2.
How much waste should I add to a lumber order?
It depends on the work and the grade. Framing cut to stock lengths often runs 5 to 15 percent, while finish work and lower grades you cut around defects run higher. Use your own past jobs where you can, and keep the allowance visible on the estimate.
What does MBF mean in lumber pricing?
MBF means one thousand board feet. Wholesale and mill prices are often quoted per MBF. Divide by 1,000 to get the price per board foot: $650 per MBF is $0.65 per board foot.
How many 2x4s do I need to frame a wall?
Count studs per wall run: length in inches divided by stud spacing, rounded up, plus one, then add corners, intersections, and openings. Plates add three lengths of the wall for a double top plate. The framing calculator does this count; enter its result here as lines to price the order.
How many board feet are in a 2x4x8?
A 2x4 that is 8 ft long has 2 x 4 x 8 / 12 = 5.33 board feet. A 2x6x8 has 8 board feet, and a 2x12x8 has 16.
Estimating Software by Trade
Related Tools & Resources
Turn Calculator Work Into Bids
Estimating Software
Related Calculators
Software Comparisons
Try it on your own plans
Automate your lumber takeoffs and quotes.
Spend less time counting lumber and copying quantities into your price sheet. Put that time into your next quote. BuildVision extracts counts and measurements from your plans and carries them through your rates and assemblies into a branded quote. Your team checks the quantities and pricing before sending. Try it free on your own plans.
First takeoff free · No card · $299/seat/month after