Upload your plans and BuildVision AI makes a first pass of counts, lengths and areas across 40 trades. Review it on the sheet or in 3D, build the BOQ with your prices, and send a quote, all in one workflow.
40 trades
15 full AI, 25 beta
2D + 3D
3D view in beta
Excel
CSV, PDF, IFC, quotes
AI takeoff software finds the symbols and measurable geometry on construction drawings and turns them into counts, lengths and areas you can price. In BuildVision AI, the first pass appears on the plan as reviewable work: pending detection groups rise to the top so you can accept useful results, dismiss wrong ones, and check the drawing before a quantity moves forward.
The AI pass is one part of the takeoff. The same editor has manual count, line, polyline, area and rectangle tools, scale calibration, sheet navigation, item naming, CSI categories, and undo and redo. The takeoff assistant can run, scope and undo the work from a chat, and the reviewed quantities flow into a Smart BOQ, your price catalogs, and the customer quote.
From the first pass on the plan to the quote your customer accepts
Pick the trades and sheets, and the AI makes a first pass of counts, lengths and areas on the plan. 15 trades run on the full AI engine; 25 more are in beta.
Run, scope and undo the takeoff from one chat beside the plan. Ask it to take off one sheet or the whole set, then review what it changed.
Switch a plan between 2D and 3D. Walls, slabs, openings, pipes, electrical devices and millwork faces stay linked to their source sheet, and the model exports as IFC.
Turn a reviewed takeoff into a bill of quantities with trade recipes, check it, and send it to a new or existing quote or an order list.
Keep your own material and labor prices, and compare supplier offers side by side before they go into the estimate.
Move accepted quantities into editable quote lines, apply labor, waste, overhead and markup, then send a PDF or a link the customer can accept.
Give the agent a plan set and scope. It does the takeoff, builds the BOQ, and moves the completed quantities into an editable quote.
Export the takeoff as Excel, CSV or a PDF report, or download the plan with your markups as an annotated PDF.
Switch any plan in a takeoff between 2D and 3D. BuildVision AI builds a partial model from the drawing, so you can inspect objects, see their quantities and dimensions, and jump back to the source sheet.
Upload PDF plans or plan images, or a ZIP of PDFs into a project
Choose trades and sheets, or ask the takeoff assistant
Accept, dismiss or redraw results against the source sheet
Excel, CSV, PDF, BOQ, IFC, or a customer quote
Every output starts from the reviewed takeoff
| Output | Formats |
|---|---|
| Takeoff | Excel (.xlsx), CSV, PDF report, annotated plan PDF |
| Bill of quantities | CSV and order-list CSV, or straight into a quote |
| Quote | Customer PDF and a public link the customer can accept |
| 3D model (beta) | IFC4, one sheet per file |
How different methods compare for processing construction blueprints
| Feature | Manual (Paper) | Digital (On-Screen) | AI-Powered |
|---|---|---|---|
| Blueprint Processing | Print and measure by hand | Point-and-click on PDF | AI first pass plus estimator review |
| Symbol Recognition | Manual identification | Manual identification | Reviewable detection groups |
| Model View | None | 2D sheet only | 2D sheet plus 3D view (beta) |
| Quantities to Price | Re-typed into a spreadsheet | Exported to a spreadsheet | Smart BOQ, price catalogs and quote |
| Estimator Review | Required | Required | Required before approval |
Which trades run on the full AI engine, and what an estimator still verifies
| Trades | AI | Estimator Review |
|---|---|---|
| Electrical, Low Voltage/Data, Security | Full AI | Reconcile legends, schedules, risers, one-lines and specifications |
| Plumbing, HVAC, Fire Protection | Full AI | Verify system sizing, fittings, accessories and schematics |
| Concrete, Structural Steel, Roofing, Doors & Windows, Demolition | Full AI | Confirm scale, details, sections and assemblies before pricing |
| Finishes, Conveying, Exterior Improvements, General | Full AI | Check finish schedules and add work the drawings do not show |
| Carpentry & Millwork, Masonry, Insulation, Site & Civil, and more | Beta | The AI measures these trades; review every measurement closely |
A: AI takeoff software uses computer vision and document analysis to find plan symbols and measurable geometry, then proposes counts, lengths and areas. A construction estimator reviews the results, adds scope the drawings do not show directly, and applies the company’s pricing.
A: 40 trades. 15 run on the full AI engine, including electrical, low voltage, plumbing, HVAC, fire protection, concrete, structural steel, roofing, doors and windows, and finishes. 25 more, such as carpentry and millwork, masonry, insulation and site work, are in beta, and the app marks them so you review every measurement closely.
A: The editor opens PDF plans and plan images (PNG, JPG and WEBP). You can also upload a ZIP of PDFs into a project. CAD files such as DWG cannot be uploaded directly, so plot or save them to PDF first.
A: Takeoffs export as Excel, CSV, a PDF report, or an annotated PDF of the plan with your markups. A Smart BOQ exports as CSV or an order list, quotes go out as a customer PDF or an accept link, and the 3D beta exports IFC4. BuildVision AI does not export DWG or DXF.
A: BuildVision AI builds a partial 3D model from the drawing: walls, slabs, openings, pipes, electrical devices and millwork faces, each linked to its source sheet. Heights come from section and elevation sheets where the drawings state them; otherwise they are marked as inferred. The 3D view is in beta and does not change your takeoff quantities.
A: No. It proposes plan-linked counts and measurements for review, while an estimator still interprets notes, schedules, specifications, addenda, means and methods, labor, pricing, exclusions, and risk.
A: Yes. Accept or dismiss detection groups individually or in bulk, add manual counts, lines, polylines, areas and rectangles, rename items, assign CSI categories, and undo or redo, either in the editor or through the takeoff assistant.
A: Yes. Accepted AI and manual items can go through a Smart BOQ or straight into editable quote lines. You complete pricing, labor, waste, overhead, markup, exclusions and terms before sending the quote.
Upload a plan set, review the first pass in 2D or 3D, and build an editable quote.