In construction estimating

Rebar Sizes

US rebar is sized by bar number, where #3 through #8 equal the nominal diameter in eighths of an inch, so a #4 bar is 1/2 inch and a #5 bar is 5/8 inch.

Definition

Rebar sizes in the US are designated by bar number. For bars #3 through #8, the number is the nominal diameter in eighths of an inch: #3 is 3/8 inch, #4 is 1/2 inch, #5 is 5/8 inch, #6 is 3/4 inch, #7 is 7/8 inch, and #8 is 1 inch. Larger bars, #9, #10, #11, #14, and #18, have nominal diameters of 1.128, 1.270, 1.410, 1.693, and 2.257 inches. Bars are deformed with ribs to bond with concrete and are produced to ASTM A615 (carbon steel) or ASTM A706 (weldable low-alloy steel).

The standard nominal weights per linear foot are: #3, 0.376 lb; #4, 0.668 lb; #5, 1.043 lb; #6, 1.502 lb; #7, 2.044 lb; #8, 2.670 lb; #9, 3.400 lb; #10, 4.303 lb; #11, 5.313 lb; #14, 7.650 lb; and #18, 13.600 lb. Grade 60 (60,000 psi minimum yield strength) is the most common grade in building work. Bars are also marked with soft-metric sizes, where #4 is #13, #5 is #16, and #6 is #19, roughly the diameter in millimeters.

How rebar sizes is used in estimating

Structural drawings call out rebar by count, size, spacing, and location, for example "#5 @ 12 in. O.C. each way, top and bottom" for a slab or "(4) #6 continuous" for a grade beam. Footing, column, and beam schedules list bar sizes and quantities, and typical details show lap splice lengths, hooks, cover, and dowels. General notes state the grade and the governing standard, usually ACI 318 and the CRSI detailing conventions.

Estimators take off rebar in linear feet by bar size, including laps, hooks, and bends, then convert to pounds or tons using the standard weight per foot, because reinforcing is bought and often installed by weight. Accessories such as chairs, bolsters, and tie wire are taken off separately, and many contractors send the drawings to a rebar fabricator who produces detailed placing drawings and a bar list as part of the submittal process.

Common rebar takeoff mistakes

The most common errors are leaving out lap splices on long continuous bars, missing hooks and bends at corners and footing ends, and forgetting that "each way" and "top and bottom" can double or quadruple a slab quantity. Bar spacing should be converted to a count as the clear span divided by the spacing plus one bar, not just the span divided by spacing. Check stock lengths (commonly 20, 40, and 60 feet) when estimating laps and waste, and confirm whether epoxy-coated or galvanized bars are required in any area, since they are priced differently from plain bars.

Frequently asked questions

Q.What size is #4 rebar?

#4 rebar has a nominal diameter of 1/2 inch and weighs 0.668 pounds per linear foot. It is one of the most common sizes in residential slabs, footings, and walls.

Q.How do you read rebar sizes?

For #3 through #8, divide the bar number by 8 to get the nominal diameter in inches, so #6 is 6/8 or 3/4 inch. Above #8 the numbers no longer match eighths exactly, so use the published diameters: #9 is 1.128 inches, #10 is 1.270, #11 is 1.410, #14 is 1.693, and #18 is 2.257.

Q.What are the standard rebar lengths?

Rebar is commonly stocked in 20-foot lengths, with 40-foot and 60-foot lengths available from suppliers and fabricators. Fabricated rebar is cut and bent to the lengths shown on the bar list.

Q.How do you convert rebar linear feet to tons?

Multiply the total linear feet of each bar size by its standard weight per foot to get pounds, add the sizes together, and divide by 2,000 to get tons. For example, 1,000 linear feet of #5 bar at 1.043 pounds per foot is 1,043 pounds.

BuildVision AI

Save time with AI-powered estimating

Producing accurate rebar sizes the manual way takes hours. BuildVision AI reads your drawings and generates structured takeoffs and BOQs in minutes, ready for your own pricing.

AI takeoffs

Direct from PDF plans, uploaded as one PDF or a ZIP of PDFs.

BOQ generation

Itemized bills of quantities ready for pricing or owner submission.

Quote and bid

Branded quotes priced with your own rates, shared as a link.

First takeoff free · No card · $299/seat/month after

Rebar Sizes and Rebar Size Chart | Glossary