A linear foot is a straight-line measurement of 12 inches of length, used to quantify items like pipe, conduit, trim, curb, and wall runs regardless of their width or height.
A linear foot is a measurement of length equal to 12 inches (one foot), taken along a straight line or along the run of an item. Unlike a square foot or cubic yard, a linear foot ignores width and depth entirely — 10 linear feet of 2-inch pipe and 10 linear feet of 12-inch pipe are both simply 10 LF. The terms “linear foot” and “lineal foot” are used interchangeably, and the plural is linear feet, abbreviated LF.
Linear feet are the natural unit for anything that is long and continuous: piping, conduit, ductwork, baseboard, crown molding, countertop edges, curb and gutter, fencing, footings, and wall lengths. To find linear feet, measure the length of each run in feet and add the runs together; for a room perimeter, add the lengths of all walls. One linear foot equals 0.3048 meters.
On construction drawings, linear items are shown as lines, polylines, or symbols along a path — a plumbing riser diagram, a conduit home run, a footing outline on a foundation plan, or a run of base cabinets on an interior elevation. The estimator measures each run at the drawing scale, and the quantity is carried in the takeoff and bid in LF, usually broken out by size or type so that each line can be priced with its own unit price (for example, 3/4-inch EMT separate from 1-inch EMT).
Linear-foot items often hide quantities that are not drawn to full length. Vertical drops and rises in piping and conduit appear as a single point on a plan view but add real length, and fittings, couplings, and supports are counted separately as each (EA). Materials sold in fixed stock lengths — trim, pipe, rebar, conduit — also need a waste factor for cut-offs and laps on top of the measured LF.
The most frequent error is measuring only the plan view and missing vertical length: a run of conduit that drops from the ceiling to a wall receptacle can add several feet per device that never shows up on the floor plan. Other common mistakes include using the wrong scale after a sheet has been resized, measuring a wall run once when the item appears on both faces, and lumping different sizes into one LF total that cannot be priced accurately. AI takeoff software such as BuildVision AI can make a first pass of linear runs from PDF plans for the estimator to review, but drops, rises, and spec-only scope still need a human check.
Measure the length of each piece or run in inches and divide by 12, or measure directly in feet, then add all the runs together. Width and thickness do not matter. For example, three boards that are 8 feet, 10 feet, and 12 feet long total 30 linear feet.
A linear foot measures length only, while a square foot measures area (length times width). A wall that is 20 feet long and 9 feet high is 20 linear feet of wall but 180 square feet of wall surface. Trim and base are taken off in LF; drywall and paint are taken off in SF.
No. A board foot is a volume measure used for lumber, equal to a piece 12 inches long, 12 inches wide, and 1 inch thick (144 cubic inches). A linear foot is simply 12 inches of length, regardless of the cross-section of the piece.
LF stands for linear feet. On an estimate or bill of quantities it indicates that the line item is measured and priced by length, such as 450 LF of 4-inch PVC drain line multiplied by a unit price per linear foot.
Producing accurate linear foot the manual way takes hours. BuildVision AI reads your drawings and generates structured takeoffs and BOQs in minutes, ready for your own pricing.
Direct from PDF plans, uploaded as one PDF or a ZIP of PDFs.
Itemized bills of quantities ready for pricing or owner submission.
Branded quotes priced with your own rates, shared as a link.
First takeoff free · No card · $299/seat/month after