Loading BuildVision AI
Review partition and wall runs, ceiling and soffit areas, and openings on architectural plans. Your estimator confirms wall types, heights, layers, ratings, framing, finish levels, waste, and pricing.
Start 14-day trial01 · Estimator review
Measure partition and wall geometry by estimator label, then reconcile plan lines with wall types, heights, layers, ratings, and shaft or chase details.
A measured wall run does not automatically determine boards, studs, track, backing, or finish quantities.
Trace ceiling, bulkhead, and soffit areas where the drawings define the geometry. Verify reflected ceiling plans, sections, and finish notes.
Ceiling area alone does not establish suspension, board type, access, or edge-detail scope.
Review openings, returns, corners, access panels, and repeated detail conditions that affect framing and finishing work.
Deductions and added framing must follow the estimator's wall assembly and project rules.
Board size and type, wall layers, framing gauge and spacing, deflection details, backing, fire or acoustic assemblies, finish levels, waste, and labor remain estimator decisions. Confirm the current drawing issue, addenda, specifications, exclusions, and responsible scope before pricing.
Estimator approval remains required before quantities become a bid.
02 · Review workflow
Open the current floor plans, reflected ceiling plans, wall-type schedules, elevations, and relevant architectural details.
Inspect pending marks on each source sheet. Accept useful detections, dismiss incorrect groups, and keep ambiguous work out of approved totals.
Use manual lines, polylines, rectangles, areas, and counts to complete wall, ceiling, opening, and detail scope. Label each assembly before applying company conversion and waste assumptions.
Review complete-document totals, then export CSV or create editable quote lines. Apply workspace costs, labor, and commercial terms separately.
03 · Product controls
Run an AI first pass for visible partition and wall runs, ceiling and soffit areas, doors, openings, and details. Pending groups stay on the source sheet for individual or bulk review.
Accept useful suggestions and dismiss the wrong ones before downstream use.
Use manual lines, polylines, rectangles, areas, and counts to complete wall, ceiling, opening, and detail scope. Label each assembly before applying company conversion and waste assumptions.
The estimator can correct, add, erase, undo, and redo the working takeoff.
Draw a known line, enter its real distance in feet or metres, and recompute measured quantities when the sheet needs an explicit measurement basis.
Lengths and areas remain editable and tied to a verified scale.
Rename selected work, apply CSI categories, and choose explicit labels so different systems, areas, or bid scopes do not collapse into one unexplained total.
Reviewed quantities stay organized for estimator and team review.
Roll quantities up by label across loaded pages. Complete-document export collects every page and stops with a clear message when the full result cannot be built.
No silent partial total is presented as complete.
Use workspace-owned material, labor, and subcontractor cost or sell rows, then carry accepted AI and manual items into editable grouped quote lines.
Company pricing and commercial approval stay under estimator control.
04 · Estimator decisions
Visible plan suggestions can be accepted or dismissed, but they do not prove that every item, note, schedule, detail, or concealed condition has been captured.
Board size and type, wall layers, framing gauge and spacing, deflection details, backing, fire or acoustic assemblies, finish levels, waste, and labor remain estimator decisions.
Confirm the current issue, changed sheets, addenda, and conflicting documents. Do not treat a new AI run as an automatic revision comparison or scope decision.
Current supplier quotes, maintained cost rows, labor productivity, waste, equipment, subcontract scope, code, exclusions, overhead, markup, and risk remain separate decisions.
Buyer questions
Use the plan-linked workflow to review partition and wall runs, ceiling and soffit areas, doors, openings, and details. The exact result depends on visible drawing information, scale, labels, and estimator corrections; representative plan testing is essential.
No. Board size and type, wall layers, framing gauge and spacing, deflection details, backing, fire or acoustic assemblies, finish levels, waste, and labor remain estimator decisions. BuildVision AI supports the reviewed takeoff and editable outputs; the estimator completes assemblies, pricing, labor, exclusions, and commercial approval.
Yes. Accept or dismiss pending groups, add manual counts or geometry, calibrate measured work, rename items, apply CSI categories, and keep working with undo or redo before export.
BuildVision AI exports every takeoff row to CSV with its source and review state. Quote creation uses accepted AI and manual items only. Missing pages block either output, while uncalibrated measurements appear blank in CSV and must be scaled before quote creation.
The current trial lasts 14 days. Test representative plans and review the pricing page for current plan limits and billing terms.
Your next bid
Open a representative plan, review the AI first pass, complete the scope with manual tools, then export every row with its review state or build quote lines from accepted and manual work.
Start 14-day trial