A horizontal structural member set in a repeating pattern, typically 12, 16, or 24 inches on center, that spans between beams or walls to support a floor or ceiling.
A joist is a horizontal framing member that spans between beams, girders, or bearing walls to support a floor deck or ceiling. Joists are installed parallel to each other at a regular spacing, most commonly 16 inches on center, with 12, 19.2, and 24 inches on center also standard because they divide evenly into 4 by 8 foot sheathing panels. Floor joists carry the subfloor and everything on it, while ceiling joists carry the ceiling finish and tie rafters together in many roof systems.
Joists come in several types. Dimensional lumber joists, such as 2x8, 2x10, and 2x12, are common in houses; engineered wood I-joists and open-web wood trusses span farther with less depth; and open-web steel joists, such as the K-series defined by the Steel Joist Institute, are used in commercial roofs and floors. Allowable spans depend on joist size, species and grade, spacing, and load, and residential spans are taken from the span tables in the International Residential Code or the manufacturer's published tables.
On drawings, joists appear on framing plans as a single line with an arrow showing span direction and a note such as "2x10 @ 16 in. o.c." or "14 in. TJI @ 16 in. o.c." Open-web steel joists are tagged with a designation like 18K5. The structural notes and details cover hangers, blocking or bridging, rim boards, bearing lengths, and any doubled joists under walls or around openings.
Estimators count joists as each (EA) by size and length, or convert lumber to board feet or linear feet for pricing. The count for an area is the length perpendicular to the joists divided by the spacing, plus one, then adjusted for doubled joists, headers and trimmers at openings, and rim joists. Joist hangers, bridging, and blocking are counted separately, and steel joists are often quoted by the joist supplier from the drawings.
Divide each framing bay into rectangles with a single joist size and direction, then calculate the count as bay width divided by spacing plus one, and round up. Use the next standard lumber length above the clear span plus bearing, since joists are bought in 2-foot increments. Add doubled joists below parallel partitions, headers and trimmers at stairs and shafts, rim joists around the perimeter, and a hanger at every flush connection. Finish by applying a waste factor that reflects how many cuts the layout requires.
Joists are smaller, closely spaced members that directly support the floor or ceiling. Beams and girders are larger members that support the joists and carry their load to columns or walls. Joists sit on or hang from beams.
The most common spacing is 16 inches on center. Joists are also set at 12, 19.2, or 24 inches on center depending on span, load, and the subfloor being used. All of these spacings line up with the edges of standard 4 by 8 foot panels.
It depends on the lumber species and grade, the spacing, and the design loads. The span tables in the International Residential Code list the allowable span for each combination, so look up the exact grade and spacing on the project rather than using a rule of thumb.
A rim joist, also called a band joist or rim board, runs around the perimeter of the floor framing and caps the ends of the joists. It closes the floor system, helps transfer loads to the wall below, and provides a nailing surface for sheathing.
Producing accurate joist the manual way takes hours. BuildVision AI reads your drawings and generates structured takeoffs and BOQs in minutes, ready for your own pricing.
Direct from PDF plans, uploaded as one PDF or a ZIP of PDFs.
Itemized bills of quantities ready for pricing or owner submission.
Branded quotes priced with your own rates, shared as a link.
First takeoff free · No card · $299/seat/month after