Drawings that show how a project was actually built, including every change, field adjustment, and relocated element that differs from the original design.
As-built drawings are a set of drawings that show a building or site exactly as it was constructed, rather than as it was originally designed. They capture every deviation from the contract drawings — relocated pipes and conduits, changed dimensions, substituted equipment, added framing, and any work revised by change orders, RFIs, or field decisions.
As-builts are usually produced by the contractor and its subcontractors, who mark up a dedicated field set of drawings in red ink (often called redlines) as work progresses. At closeout, those markups are turned over to the owner, and the architect or engineer may incorporate them into a cleaned-up set commonly called record drawings. The terms are often used interchangeably, but strictly speaking as-builts come from the field and record drawings are the design team’s compiled version.
Most specifications require the contractor to maintain as-builts on site throughout construction and submit them before final payment, usually under the project record documents section of Division 01 (01 78 39 in CSI MasterFormat). Mechanical, electrical, plumbing, and underground utility trades carry the heaviest as-built burden, because the routing of buried and concealed work is exactly what owners and future contractors need to know. Many owners withhold part of the retainage until acceptable as-builts and other closeout documents are delivered.
For an estimator, as-builts matter in two ways. On new work, the time spent maintaining and drafting as-builts is a real cost that belongs in general conditions or in each subcontractor’s scope, typically carried as a lump sum. On renovation and tenant improvement work, existing as-builts are often the starting point for the takeoff of demolition and existing conditions — but they are only as reliable as the contractor who prepared them, so quantities taken from old as-builts should be field verified before they are priced.
When bidding a renovation from existing as-builts, treat every quantity as provisional until it is confirmed in the field. Walk the building, compare ceiling heights, wall locations, and visible MEP routing against the drawings, and note any discrepancies in the bid qualifications. Price demolition and existing-conditions work with an appropriate contingency or carry it as an allowance when concealed conditions cannot be verified, and send an RFI when the as-builts conflict with the new design drawings. Never assume undocumented existing work matches the original design intent.
As-built drawings are the contractor’s field markups showing what was actually installed. Record drawings are the formal set the architect or engineer compiles from those markups and other closeout information. Many contracts use the two terms interchangeably, so the specification defines exactly what must be delivered.
The general contractor is usually responsible for maintaining and submitting as-builts, and it passes that obligation down to each subcontractor for their own trade. The design team may then prepare record drawings from the contractor’s markups if the owner’s contract requires it.
As-builts are maintained continuously during construction and submitted at project closeout, typically as a condition of final payment or release of retainage. Some owners also review the as-built set at monthly progress meetings to make sure it is being kept up to date.
They are a useful starting point, but accuracy varies widely depending on how carefully they were maintained. Estimators bidding renovation work should field verify critical dimensions and concealed conditions and qualify their bid for anything that cannot be confirmed.
Producing accurate as-built drawings the manual way takes hours. BuildVision AI reads your drawings and generates structured takeoffs and BOQs in minutes, ready for your own pricing.
Direct from PDF plans, uploaded as one PDF or a ZIP of PDFs.
Itemized bills of quantities ready for pricing or owner submission.
Branded quotes priced with your own rates, shared as a link.
First takeoff free · No card · $299/seat/month after